Request Information

The 10 Universal Signal Inputs Controller accepts up to 10 analog or digital type inputs (0-5V, 0-10V, 0-20 mA, 4-20 mA, Digital, PWM, Frequency/RPM or Counter). The modules can be connected to a variety of analog machine sensors or levers, PLC’s, switches, PWM signals, etc. It interfaces with the machine’s CAN network (CANopen). Standard embedded software is provided. Rugged packaging in addition to a wide-ranging power supply input section for 12V or 24Vdc power suits applications in the harsh environment of mobile equipment with on-board battery power. All setpoints are user configurable using commercially available CANopen® tools.

Unit of Measure

Order Code

 N/A P/N: AX030311 (CANopen®, configurable baud rate)

Operating Voltage

 N/A 12V, 24VDC Nominal 8…36VDC Power Supply Range

Inputs

 N/A Up to 10 digital inputs are user selectable from the following:
Active High/Active Low
PWM signal from sensors or diesel engines ECM's
Frequency (Hz or RPM)
Counter Up to 8 digital inputs are user selectable as Active High/Active Low.

Communications

 N/A 1 CAN 2.0B port, Protocol CiA CANopen®

Control Logic

 N/A Standard embedded control logic is provided. User programmable functionality uses SDO object access with commercially available CANopen® tools. An EDS File is provided.

Enclosure

 N/A High Temperature Nylon housing - TE Deutsch PCB Enclosure (EEC-325X4B):
4.64 x 5.23 x 1.41 inches
(117.90 x 132.90 x 35.80 mm)
(W x L x H Excluding Mating Connectors)

Protection Rating

 N/A IP67

Operating Temperature

 N/A -40 to 85 ºC-40 to 85 ºF

Compliance

 N/A CE marking EMC Directive Exempt from Low Voltage Directive RoHS Directive

Applications

 N/A

Engine controls for power generation, co-generation, stationary power.

Accessories

 N/A , Mating Plug KIT (DTM06-12SA, DTM06-12SB, 2 WM12S, 24 Contacts, Plugs)