This H-bridge controller measures numerous types of input signals as well as provides different outputs. It has three Universal Inputs. The two outputs can provide up to 2.5 A of current. Each output is a half-bridge. They form a full H-bridge when used together. Flexible circuit design gives the user a wide range of configurable input and output types. Powerful control algorithms allow the user to program the controller for a wide range of applications without the need for custom firmware. It features auto-baud-rate detection.

The compact BLDC Motor Controller features unidirectional or bi-directional BLDC motor control with sensorless operation. It may also provide unidirectional or bi-directional control of a DC (brushed) motor. The motor drive is user configurable with the Electronic Assistant. Designed for EMI/EMC compliance, it is also fully sealed with a rugged IP67 enclosure.

Controls for brushless DC motors, motor drives, variable speed drive, motor speed control, BLDC motors, DC motors, AC motors, DC motors used in fuel cells, material handling equipment and electric vehicles. Use the CAN bus network for machine control.

The BLDC Motor Controller has four universal inputs that can be configured to measure voltage, current, frequency, PWM duty cycle, resistance or digital voltage level (on/off). It accepts 12Vdc, 24Vdc or 48Vdc nominal input power. The controller can drive brushless DC motors equipped with Hall sensors up to 240W nominal. Sensorless motor control using Back-EMF rotor position detection is also supported.

The 40A DC Motor Controller features Unidirectional or bi-directional BLDC motor control with hall effect sensor feedback. A user configurable enable function can be mapped to any of the 2 digital inputs or a CAN message. 1 current output (2.5A proportional or hotshot digital) is available to drive accessories such as hydraulic valves or relays for machine control or safety interlock. Use the Electronic Assistant for setpoint configuration. The drive is IP67 rated.

The universal motor controller, 100W, drives a brushed DC Motor up to 6A or a 3-phase BLDC motor up to 6A. It features two SAE J1939 ports. Interfacing with 12V or 24Vdc power, the controller accepts 4 universal inputs (voltage, current, Frequency, PWM, SENT or digital input types). In addition, the controller interfaces with 3 standard A and B phase encoder inputs or can provide 3 PWM signal outputs. Settings are user configurable to suit many applications. The enclosure is IP67 rated.

The AX100310 motor controller has SAE J1939 communications and the AX100311 motor drive communicates over CANopen. They offer smooth and precise unidirectional speed control for brushed and other DC motors. This controller is compact and is designed for highly efficient and reliable power control.

The AX100600 provides smooth and precise speed control with CAN communications for bidirectional, brushed and other DC motors. This controller is compact, rugged with an IP67 rating and is designed for highly efficient and reliable power control.

The 25A, unidirectional or bi-directional DC motor control features open loop speed control, with closed loop speed control and external feedback control available on request. The unit allows the user to map its control input to either of the 2 command inputs or messages from a CAN bus. The Enable function may also be mapped to 2 inputs or CAN. The device is suitable for moist, high shock and vibration environments, and features a highly efficient and robust design with isolation for drive and processing circuits.

The 40A DC Motor Controller features Unidirectional or bi-directional DC motor control (up to 40A), fully isolated output. Configurable and independent ramps smooth motor rotation, protecting the controller and the system. Additional 2 isolated current outputs (2A proportional, hotshot digital, PWM D.C., Proportional Voltage or On/Off Digital) drive accessories such as hydraulic valves or relays for machine control or safety interlock. Compact size for easy mounting on a vehicle.

The motor controller can be operated as either a self-contained control system, driving the motor directly from the onboard inputs, or it can be integrated into a CAN J1939 network of controllers. It has four universal signal inputs and 4 digital inputs that can be used to drive the motor or extra outputs. Two of the digital inputs are reserved for safety interlock functionality. In addition to the powerful DC motor drive, the motor controller has two outputs to drive two hydraulic proportional coils up to 2.5A each, and two relay outputs. This allows the motor controller to be a fully integrated control platform for small machines using a combination of hydraulic actuators and a motor drive system. It uses full isolation to separate the inputs and the processor section of the controller from the motor power and output. The motor controller has a number of built-in protections that can shut off the motor in adverse conditions. These features include hardware shutoffs to protect the circuits from being damaged as well as software shutdown features that can be enabled in safety critical systems. A rugged enclosure and connections provide reliability in machine environments.

The Stepper Motor Controller provides simple and accurate control of the levels, waveforms, timing and phase-shifts of the current for a two phase stepper motor via SAE J1939 command messages. Analog and Digital command inputs are provided for a run-time parameter, feedback in a PID control loop or as an E-stop command. 1 pulse or PWM input for inductive or active sensor is available. Motor direction is selectable. An additional output is provided, a sinking digital output (up to 5A) for a relay, brake or other load.

The Dual Stepper Motor Controller provides simple and accurate control of the levels, waveforms, timing and phase-shifts of the current for two (2) two- phase stepper motors via SAE J1939 command messages. Analog and Digital command inputs are provided for a run-time parameter, feedback in a PID control loop or as an E-stop command. 1 pulse or PWM input for inductive or active sensor is available. Motor direction is selectable. An additional output is provided, a sinking digital output (up to 5A) for a relay, brake or other load.