The Thermocouple Module monitors up to 2 channels of Type J, K, B, E, N, R, S or T thermocouples (others on request). The temperature information is provided to the engine control system over SAE J1939 CAN bus. Temperature information can include exhaust temperature, winding temperature, and fluid temperature monitoring. All channels are fully isolated and measure temperatures at the same time. Temperature data is automatically sent over the CAN bus when power is applied. During set-up, using an USB-CAN converter and a PC, the operator can configure the controller via the Axiomatic Electronic Assistant to suit a wide variety of applications.

Technical Specifications

N/A Thermocouple Module, 2 Channel, 1 Mbps SAE J1939

Order Code

N/A P/N: AX188000-02

Operating Voltage

N/A 12 or 24VDC nominal

Protection

N/A Surge and Reverse Polarity Protection Provided

Inputs

N/A 2 Type J, K, B, E, N, R, S or T TC

CAN Baud Rate

N/A 1 Mbps

Enclosure

N/A Molded Enclosure, Integral Connector
Nylon 6/6, 30% Glass, Ultrasonic Welded
3.47 x 2.75 x 1.31 Inches
88.2 x 70.0 x 33.3 mm
L x W x H Including Integral Connectors.

Connections

N/A TE Deutsch 8-pin Receptacle (P/N: DT04-08PA).

Protection Rating

N/A IP67

CAN

N/A 1 CAN port (SAE J1939)

Isolation

N/A Full isolation of each channel from the CAN line, other inputs and power supply.
Isolation voltage is 1500 Vac (rms) or 2550V for 1 sec. for all channels to power and 50V (rms) for all channels to CAN interface

Applications

N/A Power Generator Sets

Datasheet

N/A AX188000 Datasheet

User Manual

N/A AX188000 User Manual

2D Drawing

N/A AX188000-MD-2D-02

STEP Files (3D)

N/A AX188000-02

Compliance

N/A LVD - DoC - All
RoHS - DoC - All
Sira 15ATEX4138X Iss 4.

Accessories

N/A , Plug Kit: DT06-08SA, W8S, 0462-201-16141, 114017
, Axiomatic Electronic Assistant KIT (USB-CAN Converter, USB-A to USB-B Cable, CAN Cable, Installation Instructions)
, Axiomatic Electronic Assistant KIT (USB-CAN Converter, USB-A to Micro USB-B Cable, CAN Cable, Installation Instructions)