Request Information

The RTD Scanner monitors 8 RTD inputs (PT100) from a diesel engine and the temperature information is provided to the engine control system over a SAE J1939 CAN bus. Temperature information can include exhaust temperature, winding temperature, and fluid temperature monitoring. All channels of temperature data are automatically sent over the CAN bus when power is applied with no additional programming or configuration required. Integral diagnostics determine RTD integrity.  RTD inputs are isolated from the CAN communication and power supply. During set-up, using a USB-CAN converter and a PC, the operator can configure the controller via the Axiomatic Electronic Assistant to suit a wide variety of applications.

The RTD Scanner features rugged packaging and TE Deutsch connectors for an IP67 rating.

Applications include stationary/portable power generator sets and genset control systems.

Unit of Measure

Technical Specifications

 N/A RTD Scanner

Order Code

 N/A P/N: AX180300

Operating Voltage

 N/A 12 or 24 VDC nominal (8 to 65 VDC power supply range)

Enclosure

 N/A 149.00 mm x 145.30 mm x 73.00 mm 5.86 in x 5.72 in x 2.87 in W x L x H Excluding Mating Connectors

Protection Rating

 N/A IP67

Operating Temperature

 N/A -40 to 85 ºC-40 to 185 ºF

Reverse Polarity Protection

 N/A Provided

RTD Inputs

 N/A Reads 8 RTD inputs

CAN Baud Rate

 N/A 250 kbit/s, 500 kbit/s, 667 kbit/s, 1 Mbit/s auto-baud-rate detection

Enclosure (Filter)

 N/A Box

Compliance

 N/A CE / UKCA Marking for EMC and RoHS Directives Marine Type Approvals: Lloyd’s Register TAC, CCS TAC, ABS PDA, RINA

Accessories

 N/A , Plug Kit: DT06-08A, W8S, sockets + DRC16-40S (no key), sockets
, Electronic Assistant KIT (AX070501 USB-CAN, 2 Cables, Installation Instructions)