The Hydraulic Valve Controller is a highly programmable electronic control with 8 inputs and 5 outputs. The machine designer can configure it for their mobile application such as off-highway vehicles or on-road vehicles. Its sophisticated control algorithms allow for open or closed loop drive of the proportional outputs. It can be operated as either a self-contained control system, driving the outputs directly from the on-board inputs, and/or it can be integrated into an SAE J1939 network of

more
Unit of Measure

Order Code

P/N: AX021900 (SAE J1939)

Operating Voltage

12V, 24V or 48VDC Nominal

Communications

1 CAN (SAE J1939)

Control Logic

Standard embedded software with user programmable setpoints and control profiles (Refer to datasheet).

Enclosure

High Temperature Nylon Housing
TE Deutsch PCB Enclosure (EEC-325X4B)
4.62 x 5.24 x 1.43 inches
117.42 x 133.09 x 36.36 mm
(W x L x H Excluding Mating Plug)

Outputs

High Side (sourcing)

4 proportional or on/off valve drivers up to 2.5 A
User programmable as:
Proportional Current
Hotshot Digital
On/Off Digital
Proportional Voltage
PWM Duty Cycle

1 digital output up to 2.5A
Can be used to drive a diagnostic lamp

Applications

Industrial, off-highway (mobile) and marine applications for the control of hydraulic valves.

Interface with a diesel engine’s electronic control module PWM signal to drive accessories.

User Configurability

Electronic Assistant, P/N: AX070502

Inputs

1 digital input for enable/disable functionality. 1 magnetic pickup sensor input (RPM). 6 universal analog signal inputs
(current, voltage, resistive, frequency, RPM, PWM or digital)

Reference Voltage

1 +5V, 50 mA

Enclosure (Filter)

Box