24Vdc/12Vdc, Isolated DC/DC Converters From Axiomatic

These DC/DC Converters provide clean 12VDC power suitable for instrumentation and control networks equipment. For operation under harsh and demanding conditions, the units are fully sealed and IP67 rated to protect against moisture, shock and vibration. Power from a battery or other source in the range of 24VDC is converted to a 12VDC output. Input and output isolation is provided. The units are designed with rugged electrical protections. Nominal nameplate rating vary with the models.

Request Information
Unit of Measure
Items
AX082300

9-36Vdc/12Vdc, 18W, Isolated DC/DC Power Converter
AX081152 24V/12V, 5A Isolated DC/DC Converters

24Vdc-12Vdc Converter, 60W, Isolated
AX081152 24V/12V, 5A Isolated DC/DC Converters

KIT (AX081152 24Vdc-12Vdc Converter and WH-DT06-4S-S-16AWG-2M Wire Harness)
AX081510

10-36VDC to 12VDC Isolated Power Converter, 300W
AX081510

KIT( AX081510 Converter, AX070115 Wire Harness)
Description N/A

These IP67 rated rugged 18W DC/DC Isolated Power Converters come in three models: 9-36Vdc to 12 Vdc, 12 Vdc to 12 Vdc, and 24V/24V. These units are housed in compact laser-welded enclosures that provide thermal protection for over temperature, reverse battery and over and under-voltage protection, short circuit and overcurrent production, and protection against 205Vdc load dump. It uses a 4-pin TE Deutsch type connector and is suited for application on vehicles.

 		N/A The DC-DC Converter provides clean 12VDC power suitable for instrumentation and control networks or process equipment. For operation under the most harsh and demanding conditions, the unit is fully sealed, IP67 rated and enclosed to protect against moisture, shock and vibration. Power from a battery or other source in the range of 24VDC is converted to a 12VDC output regulated to 0.5%. Input and output isolation is provided. The unit is designed with extremely rugged surge and transient suppression in addition to sustained over/under voltage protection. With a nominal nameplate rating of 60 Watts output power, the DC-DC Converter has an efficiency rated at >89%. N/A

The DC-DC Converter provides clean 12VDC power suitable for instrumentation and control networks or process equipment. For operation under the most harsh and demanding conditions, the unit is fully sealed, IP67 rated and enclosed to protect against moisture, shock and vibration. Power from a battery or other source in the range of 24VDC is converted to a 12VDC output regulated to 0.5%. Input and output isolation is provided. The unit is designed with extremely rugged surge and transient suppression in addition to sustained over/under voltage protection. With a nominal nameplate rating of 60 Watts output power, the DC-DC Converter has an efficiency rated at >89%.

 		N/A
The DC/DC power converter accepts from 10Vdc-36Vdc voltage input. It provides 12VDC, 300W of power to control systems. The power supply is enclosed in an IP67 rugged enclosure for installation in a outdoor machines and vehicles with charging/cranking battery based power.
 		N/A
The DC/DC power converter accepts from 10Vdc-36Vdc voltage input. It provides 12VDC, 300W of power to control systems. The power supply is enclosed in an IP67 rugged enclosure for installation in a outdoor machines and vehicles with charging/cranking battery based power.
Order Code N/A N/A P/N: AX081152 N/A KIT P/N: AX081152K (includes wire harness) N/A P/N: AX081510 N/A P/N: AX081510K (includes wire harness)
Inputs N/A 12V regulated to 2% @ 1.5A load N/A 24VDC (9-36VDC) N/A 24VDC (9-36VDC) N/A 12V nominal (10...36 Vdc) N/A 12V nominal (10...36 Vdc)
Outputs N/A N/A 12VDC +/- 0.5% N/A 12VDC +/- 0.5% N/A 12.5 VDC +/- 2% N/A 12.5 VDC +/- 2%
Output Current N/A 1.5 A Continuous N/A 5A Continuous N/A 5A Continuous N/A 25A Continuous N/A 25A Continuous
Enclosure N/A Molded Enclosure, integral connector
Nylon 6/6, 30% glass, Laser Welded
4.24 in x 3.69 in x 1.41 in (107.5 mm x 94 mm x 36 mm)
L x W x H including integral connector 		N/A Aluminum Enclosure
Encapsulated
3.76 x 6.12 x 1.93 inches
95.5 x 155.6 x 49.0 mm
(W x L x H Including Connector) 		N/A Aluminum Enclosure
Encapsulated
3.76 x 6.12 x 1.93 inches
95.5 x 155.6 x 49.0 mm
(W x L x H Including Connector) 		N/A Cast Aluminum housing, integral gasket and connector
8.14 x 5.83 x 2.50 inches (206.82 x 148.00 x 63.25 mm)
L x W x H including integral connector 		N/A Cast Aluminum housing, integral gasket and connector
8.14 x 5.83 x 2.50 inches (206.82 x 148.00 x 63.25 mm)
L x W x H including integral connector
Connections N/A Integral 4 pin receptacle based on TE Deutsch P/N: DT04-04P
18 AWG wire is recommended for use with contacts 0462-201-16141 		N/A TE Deutsch P/N: DT13-4P
Connector assembly mates to a wire harness comprised of a 4 pin plug 		N/A TE Deutsch P/N: DT13-4P
Connector assembly mates to a wire harness comprised of a 4 pin plug 		N/A 1 TE Deutsch DTP13-4P N/A 1 TE Deutsch DTP13-4P
Protection Rating N/A IP67
Operating Temperature N/A -40 to 70 ºC-40 to 158 ºF N/A -40 to 85 ºC-40 to 185 ºF N/A -40 to 85 ºC-40 to 185 ºF N/A -40 to 80 ºC-40 to 176 ºF N/A -40 to 80 ºC-40 to 176 ºF
Isolation N/A N/A 700Vdc between primary and secondary. Isolated from input, output and chassis ground. N/A 700Vdc between primary and secondary. Isolated from input, output and chassis ground. N/A 707 VDC Minimum N/A 707 VDC Minimum
Applications N/A

Item# - AX070106
Item Name - Mating Plug Kit

 		N/A Lift Equipment
Off-highway Equipment
Mining Vehicles 		N/A

Lift Equipment
Off-highway Equipment
Mining Vehicles

 		N/A

The DC/DC converter is suitable for application on charging/cranking battery based systems:

  • Off-highway Equipment
  • Power generator set control systems
  • Oilfield equipment
  • Telecom
 		N/A

The DC/DC converter is suitable for application on charging/cranking battery based systems:

  • Off-highway Equipment
  • Power generator set control systems
  • Oilfield equipment
  • Telecom
Datasheet N/A TDAX082300
N/A AX081152 Datasheet
N/A AX081152 Datasheet
N/A TDAX081510
N/A TDAX081510
2D Drawing N/A AX082300-MD-R1-D1
N/A AX081152-MD-A
N/A AX081152-MD-A
N/A AX081510-MD-A
N/A AX081510-MD-A
STEP Files (3D) N/A generic4pinLW
N/A AX081152
N/A AX081152
N/A AX081510
N/A AX081510
Compliance N/A LVD - DoC - All
RoHS - DoC - All
N/A EMC-AX081100B--AX081152--AX083100--AX083110
LVD - DoC - All
RoHS - DoC - All
N/A EMC-AX081100B--AX081152--AX083100--AX083110
LVD - DoC - All
RoHS - DoC - All
N/A EMC - DoC - AX0815X0
LVD - DoC - All
RoHS - DoC - All
UKCA - DoC - AX0815X0
N/A EMC - DoC - AX0815X0
LVD - DoC - All
RoHS - DoC - All
UKCA - DoC - AX0815X0
Accessories N/A , Plug Kit: DT06-4S, W4S, 0462-201-16141
 		N/A , Mounting Plate for installations needing mounting holes of PSU9
 		N/A N/A , Wire Harness: DTP06-4S Assembly + 2m 10AWG unterminated wires
, PL-DTP06-4S Mating Plug Kit: (DTP06-4S, WP4S, 4x 0462-203-12141)
 		N/A
Protection N/A Protected against 205Vdc load dump Reverse battery, over and under-voltage protection Short circuit and overcurrent protection Thermal protection for over temperature N/A Reverse Polarity Protection N/A Reverse Polarity Protection N/A Thermal protection, Reverse battery, over and under-voltage protection, Short circuit and overcurrent protection. N/A Thermal protection, Reverse battery, over and under-voltage protection, Short circuit and overcurrent protection.
Output Voltage N/A 12 VDC +/- 0.24V N/A N/A N/A N/A
Compliance N/A EMI/EMC Compliant N/A EMC Compliant for transients, surge and load dump. IEC61000-4-4 IEC61000-4-5 SAE J1113-11 N/A EMC Compliant for transients, surge and load dump. IEC61000-4-4 IEC61000-4-5 SAE J1113-11 N/A CE N/A CE