Note: Axiomatic Electronic Assistant (EA) programs are located under "EA & Other Configuration Tools" under the "Support" tab. Please contact Axiomatic for the password.
The Axiomatic Electronic Assistant (EA) is a software configuration tool that runs on the Windows® operating system and is connected to an SAE J1939 bus via a USB to CAN converter, AX070501. Upon being connected to the bus, the EA will find all Electronic Control Units (ECU) on the bus and recognize those manufactured by Axiomatic. Using this tool, a user can quickly configure an Axiomatic ECU for the desired performance over a wide variety of applications. Axiomatic CAN Assistant – Scope software monitors CAN messages in a text format and is able to send single frames to the CAN bus. It is useful for PC-based debugging of J1939, CANopen® or proprietary networked devices. The CAN Assistant – Visual software presents J1939 data in a graphic and user-friendly text format. The Axiomatic USB-CAN Converter includes a Software Development Kit (SDK). The SDK is designed to allow independent software developers and system integrators to use Axiomatic USB-CAN Converter hardware, in their own applications. The Axiomatic USB-CAN Converter, is a communication module designed to provide an interface between a PC and a generic CAN bus. The converter is plugged one side to a full-speed USB PC port with a standard USB cable and the other side to a CAN bus through a DB9 CAN connector.
Two versions are available.
- The AX070502 kit includes the AX070501 (USB to CAN converter), one CAB-AX070501 (CAN Cable with female DB-9 - 30 cm/1 ft.), one CBL-USB-AB-MM-1.5 (USB-A to USB-B cable - 1.5 m/4.9 ft.), and installation instructions.
- The AX070506K kit includes the AX070501 (USB to CAN converter), one CAB-AX070501 (CAN Cable with female DB-9 - 30 cm/1 ft.), one CBL-USB2.0AM-CM-S-1M (USB-A to USB-C cable - 1 m/3.2 ft.), one CBL-USB2.0CM-CM-S-1M (USB-C to USB-C cable - 1 m/3.2 ft.), and installation instructions.
