The 1 Universal Input, Dual Valve Controller is a highly programmable electronic valve controller. The machine designer can configure the electronic control for their vehicle application. Its sophisticated control algorithms allow for open or closed loop drive of the proportional outputs to actuate hydraulic solenoids. It can be operated as either a self-contained control system, driving the valves directly from the on-board inputs, and/or it can be integrated into a CAN J1939 or CANopen network of controllers. All I/O and logical function blocks on the unit are inherently independent from one another, but can be programmed to interact in a large number of ways. As an electrohydraulic component, it provides precise, repeatable electronic control of 2 proprotional or on/off hydraulic valves in response to CAN messages or one voltage, current, and/or other signal inputs from a joystick, switch or ECU in off-highway construction equipment, material handling machines and other vehicles. It is ruggedly packaged with IP67 protection.

Order Code

N/A P/N: AX022000 (SAE J1939)

Operating Voltage

N/A 12V, 24V or 48VDC Nominal (8…60VDC)

Inputs

N/A 1 user programmable universal signal input
(Voltage, Current, Resitive, Digital, PWM, Frequency/RPM)

Outputs

N/A High Side (sourcing)
Drives up to 2 Proportional or On/Off Valves (up to 3A each)
Outputs are user programmable to drive: proportional current (up to 3A each); hotshot digital current; proportional voltage (up to supply); proportional PWM; or straight on/off digital loads.

Communications

N/A 1 CAN (SAE J1939)

Control Logic

N/A Standard embedded software with user programmable setpoints and control profiles (Refer to datasheet.)

User Configurability

N/A Electronic Assistant, P/N: AX070502

Enclosure

N/A Aluminum Enclosure
Integral TE Deutsch Connector
Encapsulated, Nitrile Gasket, IP67
2.15 x 4.76 x 1.76 inches
54.61 x 120.91 x 44.75 mm
L x W x H Including Integral Connectors

Reference Voltage

N/A 1 +5V, 10 mA

Applications

N/A Industrial, off-highway (mobile) and marine applications for the control of hydraulic valves. Interface with a diesel engine’s electronic control module PWM signal to drive accessories.

Datasheet

N/A AX022000 Datasheet

User Manual

N/A AX022000 User Manual

2D Drawing

N/A AX022000-2D

Compliance

N/A AX02200X EMC
LVD - DoC - All
RoHS - DoC - All

STEP Files (3D)

N/A DT15-12PA Generic Enclosure

Accessories

N/A , Plug Kit (DT06-12SA, W12S, 0462-201-16141, 114017)
, Electronic Assistant KIT (AX070501 USB-CAN, 2 Cables, Installation Instructions)