CAN to 1 Signal Output Controller accepts power supply voltages from 9 to 36 VDC.
Versatile control algorithms/ function blocks allow the user to configure the controller for a wide range of applications without the need for custom firmware. All logical function blocks on the unit are inherently independent from one another but can be configured to interact with each other. All parameters are configurable using Axiomatic Electronic Assistant.
The hardware design allows for the controller to have a wide range of output types: Current, Voltage, and PWM.
It can operate at standard 250 kbit/s and 500 kbit/s and non-standard 667 kbit/s and 1 Mbit/s baud rates. The required baud rate is detected automatically upon connection to J1939 CAN network.
Technical Specifications |
N/A CAN to 1 Signal Output Controller |
Order Code |
N/A P/N: AX130760 |
Operating Voltage |
N/A 12 or 24Vdc Nominal (9…36Vdc) The minimum allowable supply voltage for the power pin is 8 VDC. |
Signal Outputs |
N/A
1 signal outputs configurable as: 0-5V 0-10V 0 - 20 mA 4 - 20 mA Frequency or PWM Signal |
Communications |
N/A 1 CAN (SAE J1939) |
Control Logic |
N/A Axiomatic Electronic Assistant AX070502, or AX070506K Pre-programmed with standard logic. |
Enclosure |
N/A
Plastic Enclosure, integral connector Nylon 6/6, 30% Glass Laser Welded 3.02 x 2.41 x 1.26 inches (77 x 61.3 x 32 mm) L x W x H including integral connector |
Connections |
N/A Integral TE Deutsch equivalent 6 pin receptacle (P/N: DT04-6P). |
Protection Rating |
N/A IP67 |
Operating Temperature |
N/A -40 to 85 ºC-40 to 185 ºF |
Applications |
N/A
Distributed controls in
|
Datasheet |
N/A
AX130760 Datasheet |
User Manual |
N/A
AX130760 User Manual |
2D Drawing |
N/A
AX130760-MD-R1 |
Compliance |
N/A
LVD - DoC - All RoHS - DoC - All |
STEP Files (3D) |
N/A
6pinweldedhousing |
