Request Information

The 18 Digital Signal Input Module accepts up to 10 digital type inputs (active high/active low, PWM signal, Frequency or counter). Eight additional digital inputs are user selectable as Active High or Active Low. The electroni control can be connected to a variety of machine switches, sensors, PWM signals, etc. It interfaces with the machine’s CAN network (SAE J1939). Standard embedded software is provided. Rugged packaging in addition to a wide-ranging power supply input section for 12V or 24Vdc power suits applications in the harsh environment of mobile equipment with on-board battery power. All setpoints are user configurable using the Electronic Assistant.

Unit of Measure

Order Code

 N/A P/N: AX030310 (SAE J1939, Auto baud rate detect)

Operating Voltage

 N/A 12V, 24VDC nominal (8…36VDC power supply range)

Inputs

 N/A Up to 10 digital inputs are user selectable from the following:
Active High/Active Low
PWM signal from sensors or diesel engines ECM's
Frequency (Hz or RPM)
Counter Up to 8 digital inputs are user selectable as Active High/Active Low.

Communications

 N/A 1 CAN port (2.0B, SAE J1939). Auto-baud-rate detect.

Control Logic

 N/A Standard Embedded Software User programmable functionality using Electronic Assistant. (Application-specific logic is available on request.)

Enclosure

 N/A High Temperature Nylon housing - TE Deutsch PCB Enclosure (EEC-325X4B):
4.64 x 5.23 x 1.41 inches
(117.90 x 132.90 x 35.80 mm)
(W x L x H Excluding Mating Connectors)

Protection Rating

 N/A IP67

Operating Temperature

 N/A -40 to 85 ºC-40 to 185 ºF

Compliance

 N/A CE marking EMC Directive Exempt from Low Voltage Directive RoHS Directive

Applications

 N/A

Engine controls for commercial vehicles, off-highway equipment, etc.

Engine controls for power generation, co-generation, stationary power.

Accessories

 N/A , Electronic Assistant KIT (AX070501 USB-CAN, 2 Cables, Installation Instructions)
, Mating Plug KIT (DTM06-12SA, DTM06-12SB, 2 WM12S, 24 Contacts, Plugs)