Request Information

The Ethernet Switch operates as an unmanaged switch that is capable of handling communication of 6 different Ethernet capable devices. Each port can communicate up to 100mbps and has LED indicators showing the status of the ports. This module can be powered through either the power input connector, or through port 1. It can also power two external devices through ports 2 and 3, connecting them to the input power. Each of these two ports has over current protection that triggers at 1A.

Unit of Measure

Operating Voltage

 N/A 12VDC or 24VDC Nominal (8...36 VDC)

Protection

 N/A Surge and reverse polarity protection are provided.
Input overvoltage, input undervoltage and output overcurrent protection are provided.

Inputs

 N/A 1 Accessory Switch Input, 0-36Vdc
Switch enabled > 2.0 Vdc
Switch disabled < 0.8 Vdc
The input accessory switch can shut down the device and Port and 3 power sourcing.
If power is applied through port 1, input accessory switch is ignored.

Outputs

 N/A Power output is available from Ports 2 and 3.
9…36Vdc (Vps)
1.4A current maximum

Ethernet

 N/A 6 ports
10/100 Mbit Ethernet compliant
Auto-MDIX LAN 10/100 Base-T
Up to 100m transmission distance
10 or 100 Mbps transmission speed

Enclosure

 N/A Cast aluminum, anodized
7.250 x 3.750 x 1.694 inches
184.15 x 95.25 x 43.04 mm (L X W X H)

Connections

 N/A 6 CONEC M12 8-pin connectors (A-coded), P/N: 43-01332 (Connectors 1-6).

Protection Rating

 N/A IP66

Operating Temperature

 N/A -40 to 65 ºC40 to 149 ºF

Compliance

 N/A CE marking cURus to UL60950 EMC Directive EN60950-1 FCC Part 15 RoHS Directive

Applications

 N/A

Mining Equipment

Off-highway Equipment