As a highly flexible controller, it accepts one command signal input and drives a solenoid up to 3A. Many control profile parameters are user configurable. A PCB form factor is available. Operation is from -40 to 85 °C. Designed to interface with 12V or 24V battery power, it is suitable for machine and industrial applications.
Unit of Measure
Order Code |
N/A P/N: AX020700 |
Operating Voltage |
N/A 12Vdc or 24Vdc nominal (9…36 VDC power supply range) |
Control Logic |
N/A E-WRITE NFC Application for iOS devices E-WRITE NFC Application for Android devices |
Enclosure |
N/A
PCB 2.70 x 2.72 x 0.75 inches (68.59 x 69.09 x 19.00 mm) L x W x H |
Connections |
N/A 4 2-pin push-in terminal blocks (Wago P/N: 2060-402/998-404). Use 18-20 AWG wire for connection to power and solenoid. |
Operating Temperature |
N/A -40 to +85 ºC-40 to 185 ºF |
Protection |
N/A
Reverse polarity protection is provided. Overvoltage protection up to 45V is provided. Over-voltage (under-voltage) shutdown of the output load is provided. |
Outputs |
N/A
Up to 3A Half-bridge, High Side Sourcing, Current Sensing, Grounded Load High Frequency (25 kHz) Users can select the following options for output using the E-Write NFC: Proportional Output Current (with current sensing) (0-3A) Proportional Output Voltage (up to Vps) Output PWM Duty Cycle (0-100% D.C.) Digital On/Off (Gnd-Vps) |
Applications |
N/A
Machine and Industrial Applications |
Inputs |
N/A 12-bit ADC |
LED Outputs |
N/A 4 LED |
Marks |
N/A CE |
Fieldbus |
N/A No |
# Inputs |
N/A 1 |
# Outputs |
N/A 1 |
Analog (V or mA) |
N/A ± 5 V, ± 10 V (1) 0-5 V, 0-10 V (1) 4-20 mA, 0-20 mA (1) |
Proportional and On/Off Solenoid |
N/A 1 (3A) |
+V Ref |
N/A 5V, 50 mA |
# of Connections |
N/A 8 |
Enclosure (Filter) |
N/A PCB |
Compliance |
N/A CE marking |
Datasheet |
N/A
AX020700A Datasheet |
User Manual |
N/A
AX020700 User Manual |
2D Drawing |
N/A
AX020700-2D |
Compliance |
N/A
LVD - DoC - All RoHS - DoC - All |
