The Dual Plug-In Hydraulic Valve Controller is a user programmable distributed electronic control. The machine designer can configure the electronic control for their agricultural equipment or construction machine application. Its sophisticated control algorithms allow for open or closed loop drive of the proportional outputs to actuate hydraulic solenoids. The control is designed to be mounted directly on the hydraulic valve with molded Deutsch IPD connectors and provides distributed control on the mobile machine. It is integrated into a CANopen or SAE J1939 network. All outputs and logical function blocks on the unit are inherently independent from one another, but can be programmed to interact in a number of ways. As an electrohydraulic component, it provides precise, repeatable electronic control of 2 proprotional or on/off hydraulic valves in response to CAN message. It is ruggedly packaged with IP67 protection.

A single output plug-in valve controller is also available.
Request Information
Unit of Measure
Items
AX022310 (SAE J1939) Dual Plug-In Valve Controller

Dual Valve Controller, Plug-In, SAE J1939
AX022311 (CANopen<sup>®</sup>)Dual Plug-In Valve Controller

Dual Valve Controller, Plug-In, CANopen
Description N/A

The Dual Plug-In Hydraulic Valve Controller is a user programmable distributed electronic control. The machine designer can configure the electronic control for their agricultural equipment or construction machine application. Its sophisticated control algorithms allow for open or closed loop drive of the proportional outputs to actuate hydraulic solenoids. The control is designed to be mounted directly on the hydraulic valve with molded TE Deutsch connectors and provides distributed control on the mobile machine. It is integrated into a SAE J1939 network. All outputs and logical function blocks on the unit are inherently independent from one another, but can be programmed to interact in a number of ways. As an electrohydraulic component, it provides precise, repeatable electronic control of 2 proprotional or on/off hydraulic valves in response to CAN message. It is ruggedly packaged with IP67 protection.

 		N/A

The Dual Plug-In Hydraulic Valve Controller is a user programmable distributed electronic control. The machine designer can configure the electronic control for their agricultural equipment or construction machine application. Its sophisticated control algorithms allow for open or closed loop drive of the proportional outputs to actuate hydraulic solenoids. The control is designed to be mounted directly on the hydraulic valve with molded TE Deutsch connectors and provides distributed control on the mobile machine. It is integrated into a CANopen network. All outputs and logical function blocks on the unit are inherently independent from one another, but can be programmed to interact in a number of ways. As an electrohydraulic component, it provides precise, repeatable electronic control of 2 proprotional or on/off hydraulic valves in response to CAN message. It is ruggedly packaged with IP67 protection.
Order Code N/A P/N: AX022310 (SAE J1939) N/A P/N: AX022311 (CANopen®)
Operating Voltage N/A 12V or 24Vdc nominal
Inputs N/A CAN bus
Outputs N/A High Side (sourcing)
Drives up to 2 Proportional or On/Off Hydraulic Valves (up to 2.5A each) Outputs are user programmable to drive: proportional current (up to 2.5A each); hotshot digital; proportional PWM; or straight on/off digital loads.
Communications N/A 1 CAN 2.0B port 250 kbit/s, 500 kbit/s, 667 kbit/s, 1 Mbit/s auto-baud-rate detection SAE J1939 N/A 1 CAN 2.0B port
CANopen® (CiA DS-404)
Control Logic N/A Standard embedded software with user programmable setpoints and control profiles (Refer to datasheet.)
User Configurability N/A Electronic Assistant, P/N: AX070502 N/A EDS is provided to interface to standard CANopen® tools.
Enclosure N/A Molded Enclosure, IP67
Polyester with 15% Glass and Silicone Seal
Integral Connectors (TE Deutsch P/N: DT06-2S and DT04-6P)
3.037 x 1.44 x 1.53 inches
77.1 x 36.6 x 38.8 mm
L x W x H Including Integral Connectors
Operating Temperature N/A -40 to 85 ºC-40 to 185 ºF
Applications N/A

Agricultural equipment, off-highway (mobile) equipment component for the control of hydraulic valves.
Accessories N/A , Mating Plug Kit (1 DT06-6S, 1 W6S, 6 0462-201-16141)
, Electronic Assistant KIT (AX070501 USB-CAN, 2 Cables, Installation Instructions)
 		N/A , Mating Plug Kit (1 DT06-6S, 1 W6S, 6 0462-201-16141)