The quad valve controller provides precise, repeatable control of 4 proportional solenoids and 1 on/off solenoid over a CANopen® network. It interfaces to a joystick or other command input to drive multiple hydraulic valves in off-highway machines. The electronic control can interface to an ECM for auxiliary electro-hydraulic control functions on mobile equipment.

 
Unit of Measure

Technical Specifications

N/A Quad Controller, 50 mA +5V Ref (CANopen®)

Order Code

N/A P/N: AX020506

Operating Voltage

N/A 8…36VDC
1 +5V, 50 mA

Inputs

N/A Up to 6 inputs, selectable from the following:
2 PWM signal (50Hz to 10kHz)
Pulse
6 Digital
4 Analog (0-5V, 0-10V, 0-20 mA or 4-20 mA)

Outputs

N/A 1 on/off (up to 5A) 4 proportional (1.5A if all 4 used, or 2A for less than 4 used)

Communications

N/A With CANopen®

Control Logic

N/A Standard embedded software with user selectable setpoints and control options (Refer to datasheet).

User Configurability

N/A EDS file provided to interface to standard CANopen® tools.

Enclosure

N/A High Temperature Nylon Housing
TE Deutsch PCB Enclosure (EEC-325X4B)
24-pin Connector
4.62 x 5.24 x 1.43 inches
117.42 x 133.09 x 36.36 mm
(W x L x H Excluding Mating Plug)

Operating Temperature

N/A -40 to 85 -40 to 185 ºF

Applications

N/A

Industrial, off-highway (mobile) and marine applications for control of hydraulic proportional poppet or spool valves
Interface with a diesel engine’s electronic control module PWM signal to drive accessories
Transmission Controls
Vehicle Traction Control

Accessories

N/A , Mating Plug Kit with RS-232 Connector
, Mating Plug KIT (DTM06-12SA, DTM06-12SB, 2 WM12S, 24 Contacts, Plugs)