The 3 Amp Solenoid Driver simplifies control of proportional solenoids by supplying a current proportional to a user selectable input control. It is suited for industrial applications interfacing with a PLC. This linear solenoid driver utilizes high frequency switching output (PWM) to provide a DC current output. Output is user selectable as 0 to 3 Amps or 0 to +/- 3 Amps. A current sensing circuit maintains output current regardless of changes in input voltage and coil resistance. The user can adjust PWM frequency, maximum current, minimum current, a superimposed dither frequency and amplitude using single turn trim potentiometers.
Unit of Measure
Order Code |
N/A P/N: RSDSMB-0000003 |
Operating Voltage |
N/A 9-28 VDC |
Inputs |
N/A
Single analog input, user selectable 0-2.5V, 0 to +/-2.5V, 0-5V, 0 to +/-5 V, 0-10V, 0 to +/-10V or 4-20 mA, 0-20 mA |
Proportional Output |
N/A
Single output for a proportional hydraulic solenoid Mount controller close to the valve Fully configurable output (0-3A or 0 to +/-3 Amps) I-min is adjustable from -1 to +1A |
PWM Output |
N/A
User adjustable 10 to 40 kHz |
LED Outputs |
N/A Power OK and No Load condition |
Output Current |
N/A Permits monitoring of current output with a voltmeter (+/-1V/1A) |
Enclosure |
N/A
114.3 x 39.0 x 110.64 mm 4.50 x 1.53 x 4.35 inches (W x D x H including mounting plate and connectors) |
Protection Rating |
N/A IP67 |
Operating Temperature |
N/A -40 to 85 ºC-40 to 185 ºF |
Current Dither Frequency |
N/A
User adjustable 50 to 1000 Hz 0 to 400 mA (P-P) Square, sine or triangular waveform |
Applications |
N/A
Off-highway Equipment Industrial Hydraulics Valve Test Branches |
Datasheet |
N/A
TD1516AX |
Compliance |
N/A
LVD - DoC - All RoHS - DoC - All |
