This products features 1 Digital signal input up to +Vps (ignition switch) and 2 Digital outputs up to 4A. It comes in a compact, fully sealed enclosure, with IP67 protection. This product meets the surge requirements of SAE J1445.
Unit of Measure
Order Code |
N/A P/N: AX032200 (1 Digital Input, 2 Digital Outputs Valve Controller, SAE J1939 with auto-baud-rate detect) |
Operating Voltage |
N/A 12 V or 24 Vdc Nominal; 8…36 Vdc The minimum allowable supply voltage for the power pin is 7 VDC. |
Inputs |
N/A
1 Ignition Signal Input 0 to +Vps Optional Input Configuration as One Digital Input with 10K Pull-up or Pull-down Protected against shorts to Ground or +Vps |
Outputs |
N/A
2 Digital Outputs (up to 4A Sourcing) High Side Current Sensing, Grounded Load Overcurrent Protected Against Shorts to GND or +Vps Digital On/Off: Sourcing from Power Supply or Off Load at Supply Voltage must not Draw more than 4A |
Communications |
N/A 1 CAN (SAE J1939) |
Enclosure |
N/A
Molded Enclosure, Integral Connector Nylon 6/6, 30% Glass Ultrasonically Welded 3.47 x 2.75 x 1.31 Inches (88.2 x 70.0 x 33.3 mm) L x W x H Including Integral Connector |
Connections |
N/A Integral 8-pin receptacle (TE Deutsch equivalent P/N: DT04-08PA) |
Protection Rating |
N/A IP67 |
Operating Temperature |
N/A -40 to 125 ºC-40 to 257 ºF |
Applications |
N/A
Ignition switch operated valve controller for on/off valves. |
Datasheet |
N/A
AX032200 Datasheet |
User Manual |
N/A
AX032200 User Manual |
2D Drawing |
N/A
AX032200-MD-P1 |
STEP Files (3D) |
N/A
12-Pin Laser Welded Assembly |
Compliance |
N/A
LVD - DoC - All RoHS - DoC - All |
