The Single Plug-In Hydraulic Valve Controller is a user programmable distributed electronic control. The machine designer can configure the electronic control for their agricultural equipment or construction machine application. It drives one proportional hydraulic solenoid in response to a single command input signal from a joystick, potentiometer or other input. The control is designed to be mounted directly on the hydraulic valve with molded Deutsch IPD connectors and provides distributed control on the mobile machine. It is ruggedly packaged with IP67 protection.
A dual output plug-in valve controller with CAN bus is also available.
Unit of Measure
Order Code |
N/A P/N: AX023100 |
Operating Voltage |
N/A 12Vdc or 24Vdc nominal |
Inputs |
N/A 1 Signal Input (0.5-4.5VDC, 0-5VDC, 4-20 mA, or PWM) |
Outputs |
N/A
High Side (sourcing) Drives 1 Proportional Hydraulic Valve (up to 2.0A each) Output is user programmable for minimum current, maximum current, ramps, and superimposed dither. |
Control Logic |
N/A Standard embedded software with user programmable setpoints and control profiles (Refer to datasheet.) |
User Configurability |
N/A Axiomatic Local Controller Single EWRITE GUI Configuration Cable P/N: AX070120 |
Enclosure |
N/A
Molded Enclosure, IP67 Polyester with 15% Glass and Silicone Seal Integral connectors (TE Deutsch P/N: DT06-2S and DT04-6P) 3.04 x 1.44 x 1.53 inches 77.1 x 36.6 x 38.8 mm L x W x H including integral connector |
Applications |
N/A Agricultural equipment, off-highway (mobile) equipment component for the control of hydraulic valves. |
+V Ref |
N/A 5V, 50 mA |
Marks |
N/A CE |
Datasheet |
N/A
AX023100 Datasheet |
User Manual |
N/A
UMAX023100 |
2D Drawing |
N/A
AX023100-2D |
STEP Files (3D) |
N/A
AX023100-C |
Compliance |
N/A
LVD - DoC - All RoHS - DoC - All |
