The valve controller provides precise, repeatable control of 5 proportional or on/off solenoids over a SAE J1939 network. PWM signal, frequency/RPM or digital inputs as well as analog voltage, current and resistive inputs are accepted for interface to a PLC, Engine Control Module or command potentiometers.

Unit of Measure

Order Code

N/A P/N: AX020530 (250 kBit/s J1939/11, J1939/15)

Operating Voltage

N/A 12 or 24VDC nominal

Inputs

N/A 7 Universal Signal inputs are selectable by the user from the following:,
12-bit Analog to Digital (0…5Vdc, 0…10Vdc) (4…20mA or 0…20mA,)
Digital input (Active High to Vps or Active Low to GND)
PWM or Frequency/RPM Signal
Resistive (20Ω to 250KΩ), auto-ranging and self-calibrating

Outputs

N/A 5 independent outputs (0…2.5A) are user selectable from the following:
Output Disable
Hotshot Digital On/Off Digital Proportional Current Proportional Voltage PWM Duty Cycle

Communications

N/A 1 CAN port (SAE J1939)

Control Logic

N/A Standard embedded software is provided and is configurable using the Electronic Assistant (EA).

Enclosure

N/A High Temperature Nylon Housing
TE Deutsch PCB Enclosure (EEC-325X4B)
4.677 x 5.254 x 1.417 inches
118.80 x 133.45 x 35.99 mm
(W x L x H Excluding Mating Plug)

Connections

N/A TE Deutsch DTM series 24 pin receptacle (DTM13-12PA-12PB-R008).

Protection Rating

N/A IP67

Operating Temperature

N/A -40 to 85 ºC-40 to 185 ºF

Applications

N/A

The valve driver is designed for harsh operating environments. Typical applications include: industrial; off-highway (mobile); and marine applications for the control of hydraulic proportional valves.

Datasheet

N/A AX020530 Datasheet

User Manual

N/A AX020530 User Manual

2D Drawing

N/A AX020530-MD-R1

STEP Files (3D)

N/A TEDeutsch24pinEnclosure

Compliance

N/A EMC - DoC - AX02050X
LVD - DoC - All
RoHS - DoC - All

Accessories

N/A , Electronic Assistant KIT (AX070501 USB-CAN, 2 Cables, Installation Instructions)
, Mating Plug KIT (DTM06-12SA, DTM06-12SB, 2 WM12S, 24 Contacts, Plugs)