The unit measures pitch and roll inclination angles in a full ±180 degree orientation range. The unit can also output gravity angle and unit accelerations in three orthogonal directions. The inclinometer transmits angular data over CAN bus using a standard CANopen® protocol. An EDS file is provided for user installation.
Unit of Measure
Order Code |
N/A P/N: AX060841 |
Operating Voltage |
N/A 12Vdc or 24Vdc nominal |
Measurement Range |
N/A Three Axes: -180º to 180º (0 to 360º) User Configurable |
Outputs |
N/A Pitch and Roll Angles on the CAN Network |
Communications |
N/A
1 CAN port, CANopen® Integral CAN Termination Resistor |
Control Logic |
N/A An EDS file is Provided User Programmable Functionality using SDO Object Access, per CiA DS-301 |
Enclosure |
N/A
Cast Aluminum enclosure with gasket, Encapsulated 1 TE Deutsch p/n DT13-4P connector 3.34 x 3.14 x 2.18 inches 84.8 x 79.8 x 55.5 mm (L x W x H) |
Protection Rating |
N/A IP67 |
Operating Temperature |
N/A -40 to 85 ºC-40 to 185 ºF |
Applications |
N/A
Level, tilt, pitch and acceleration monitoring in agricultural, off-highway and mining equipment |
Datasheet |
N/A
AX06084X Datasheet |
User Manual |
N/A
AX0608X5-AX06084X User Manual |
2D Drawing |
N/A
AX060841-MD-A |
STEP Files (3D) |
N/A
AX060810 |
EDS |
N/A
EDS-AX060840 |
Compliance |
N/A
EMC - DOC - INC LVD - DoC - All RoHS - DoC - All |
Accessories |
N/A
PL-DT06-4S, Mating Plug Kit - 4 Socket |
