Request Information

The CAN to 2 Analog/Digital and 1 Relay Outputs Converter features 2 Analog/Digital signal outputs configurable as: 0-5V; 0-10V; 4-20 mA; Frequency or PWM Signal as well as 1 Relay output. Networking is via 1 isolated CANopen® port. It is Operational 9…36 Vdc (12 Vdc or 24 Vdc). The controller meets the surge requirements of SAE J1445, and is designed for EMC compliance for engine applications.

Technical Specifications

 N/A CAN to 2 Analog/Digital Signals and 1 Relay Output Converter CANopen®

Order Code

 N/A P/N: AX130751

Operating Voltage

 N/A 12 V or 24 Vdc nominal; 9…36 Vdc The minimum allowable supply voltage for the power pin is 7 VDC.

Signal Outputs

 N/A 2 Analog/Digital signal outputs configurable as: 0-5V; 0-10V; 4- 20 mA; Frequency or PWM Signal.

Relay Output

 N/A 1 Relay Output

Communications

 N/A 1 CANopen®

Control Logic

 N/A EDS File, Standard CANopen tools (not supplied). Standard embedded control logic.

Enclosure

 N/A Molded Enclosure, integral connector
Nylon 6/6, 30% glass Ultrasonically welded
3.54 x 2.75 x 1.31 inches (90.09 x 70.00 x 33.35 mm)
L x W x H including integral connector

Connections

 N/A Integral TE Deutsch 12 pin receptacle (P/N: DTM04-12PA).

Protection Rating

 N/A IP67

Applications

 N/A Throttle controls for marine engine applications
Diesel engine applications

Marks

 N/A CE