Request Information

The CAN to 2 Analog/Digital and 1 Relay Outputs Converter features 2 Analog/Digital signal outputs configurable as: 0-5V; 0-10V; 4-20 mA; Frequency or PWM Signal as well as 1 Relay output. Networking is via 1 isolated SAE J1939 port. It is Operational 9…36 Vdc (12 Vdc or 24 Vdc). The controller meets the surge requirements of SAE J1445, and is designed for EMC compliance for engine applications. Configuration is with the Axiomatic Electronic Assistant.

 

Technical Specifications

 N/A CAN to 2 Analog/Digital Signals and 1 Relay Output Converter

Order Code

 N/A P/N: AX130750-01

Operating Voltage

 N/A 12 V or 24 Vdc nominal; 9…36 Vdc The minimum allowable supply voltage for the power pin is 7 VDC.

Signal Outputs

 N/A 2 Analog/Digital signal outputs configurable as:
0-5V
0-10V
4 - 20 mA
Frequency or PWM Signal

Relay Output

 N/A 1 Relay Output

Communications

 N/A 1 CAN (SAE J1939)

Control Logic

 N/A Pre-programmed with standard logic.

Enclosure

 N/A Molded Enclosure, integral connector
Nylon 6/6, 30% Glass
Ultrasonically Welded
3.54 x 2.75 x 1.31 inches
(90.09 x 70.00 x 33.35 mm)
L x W x H including integral connector

Connections

 N/A Integral TE Deutsch 12 pin receptacle (P/N: DTM13-12PA-R008).

Protection Rating

 N/A IP67

Applications

 N/A

Throttle controls for marine engine applications
Diesel engine applications

Marks

 N/A CE

Accessories

 N/A , Electronic Assistant KIT (AX070501 USB-CAN, 2 Cables, Installation Instructions)