Request Information

CAN to 1 Signal Output Controller accepts power supply voltages from 9 to 36 VDC. Versatile control algorithms/function blocks allow the user to configure the controller for a wide range of applications without the need for custom firmware. All logical fuction blocks on the unit are inherently independent from one another but can be configured to interact with each other. The hardware design allows for the controller to have a wide range of output types: Current, Voltage, and PWM. It ca noperate at baud-rates of 10 kbit/s, 20kbit/s, 50kbit/s, 125kbit/s, 250kbit/s, 500kbit/s, 800kbit/s, and 1Mbit/s.

Unit of Measure

Technical Specifications

 N/A CAN to 1 Signal Output Controller

Order Code

 N/A P/N: AX130761

Operating Voltage

 N/A 12 or 24Vdc Nominal (9…36Vdc) The minimum allowable supply voltage for the power pin is 8 VDC.

Signal Outputs

 N/A 1 signal outputs configurable as:
0-5V
0-10V
0 - 20 mA
4 - 20 mA
Frequency or PWM Signal

Communications

 N/A 1 CAN (CANopen® )

Control Logic

 N/A Pre-programmed with standard logic

Enclosure

 N/A Plastic Enclosure, integral connector
Nylon 6/6, 30% Glass
Laser Welded
3.02 x 2.41 x 1.26 inches
(77 x 61.3 x 32 mm)
L x W x H including integral connector

Connections

 N/A Integral TE Deutsch equivalent 6 pin receptacle (P/N: DT04-6P).

Protection Rating

 N/A IP67

Operating Temperature

 N/A -40 to 85 ºC-40 to 185 ºF

Applications

 N/A

Distributed controls in

  • Power generation, co-generation, stationary power
  • Commercial vehicles
  • Off-highway equipment 
  • Industrial equipment

User Configurability

 N/A EDS File

Datasheet

 N/A AX130761 Datasheet

User Manual

 N/A AX130761 User Manual

2D Drawing

 N/A AX130761

EDS

 N/A EDS-AX130761

Compliance

 N/A LVD - DoC - All
RoHS - DoC - All

STEP Files (3D)

 N/A 6pinweldedhousing

Accessories

 N/A , Mating Plug Kit (1 DT06-6S, 1 W6S, 6 0462-201-16141)