Request Information

The 4 Analog or PWM Signal Output CAN Controller can extend machine control networks by adding I/O to the CAN bus. Engine control systems with CANopen® can communicate with 4-20 mA or other signal input devices using this controller as a smart interface. The Axiomatic controller can be configured to suit the specific application using a service tool. User selectable outputs include: 0-5V; 0-10V; +/-5V; +/-10V; 0-20mA; 4-20 mA; and +/-20mA. Alternatively, PWM signal outputs can be selected. The controller comes in two models, the AX030540 for SAE J1939 networks or the AX030541 for CANopen® applications.

Unit of Measure

Order Code

 N/A P/N: AX030541 (CANopen®)

Operating Voltage

 N/A 12VDC, 24VDC, or 48VDC Nominal (9…60VDC power supply range)

Outputs

 N/A 4 independent analog signal or PWM outputs, selectable from:

Standard analog voltage signal ranges, including: 0-5V; 0-10V; +/-5V; +/-10V with maximum 25mA load. Analog current signal ranges, including: 0-20mA; 4-20 mA; and +/-20mA with maximum 500Ω load. PWM outputs, including: PWM 0-100% D.C.; and Frequency 0.5- 30 kHz (5V or 12V Amplitude, maximum 40mA load)

Communications

 N/A CANopen®

Control Logic

 N/A Standard Embedded Software

User Configurability

 N/A Commercially available CANopen® tools.

Enclosure

 N/A High Temperature Nylon housing
24-pin Connector
TE Deutsch PCB Enclosure (EEC-325X4B)
4.62 x 5.24 x 1.43 inches
117.42 x 133.09 x 36.36 mm
(W x L x H excluding mating plug)

Protection Rating

 N/A IP67

Operating Temperature

 N/A -40 to 85 ºC-40 to 185 ºF

Applications

 N/A

Commercial vehicles
Off-highway Construction Equipment
Forestry Mining and Military Vehicles
Power Generation
Standby Generators
Material Handling Equipment

Accessories

 N/A , Mating Plug KIT (1-12 Socket)