Request Information

The controller features 1 isolated CAN port for user-defined communications over the bus. It accepts up to 10 analog (0-5 V, 0-10 V, 0-20 mA or 4-20 mA), digital, PWM, Frequency or RPM inputs. Two voltage references (user configurable as +5 or +10 V) are provided to power external sensors. A digital input and a resistive input allow for additional interfaces. Each input can be configured to measure the input value and send the data to a CANopen® CAN network. The I/O module provides 8 analog outputs (0-5 V, 0-10 V, +/-5 V, +/-1 0V, 0-20 mA, 4-20 mA) as well as 1 Form C relay output. Diagnostics messages are provided over the CAN network for the status of inputs or outputs.

Rugged IP67 rated packaging in addition to a 12 or 24 V power supply input section suits power generation and large engine applications.

Unit of Measure

Order Code

 N/A P/N: AX030211

Operating Voltage

 N/A 12VDC or 24VDC Nominal (9...32VDC)

Inputs

 N/A 0-5 V, 0-10 V, 4-20 mA, or 0-20 mA 10 universal inputs are user selectable from the following: Digital inputs for interface to switches, etc PWM signal, pulse or 16-bit counter inputs from sensors or diesel engine ECMs

Resistive Inputs

 N/A 1

Digital Input

 N/A 1

Outputs

 N/A 8 analog outputs (0-5 V, 0-10 V, +/-5 V, +/-10 V, 0-20 mA, 4-20 mA)

Relay Output

 N/A 1 Form C

Communications

 N/A CANopen® (SAE J1939: P/N AX030210)

Control Logic

 N/A Standard Embedded Software (For application-specific control logic, contact manufacturer.)

User Configurability

 N/A Program the controller for a specific application using its predefined internal functional blocks and any commercially available CANopen® tool.

Enclosure

 N/A 40-pin connector - TE Deutsch equivalent DRC13-40PA 8-pin connector - TE Deutsch equivalent DT13-08PA Aluminum extrusion with stainless steel end plates
5.86 x 5.60 x 2.87 inches
149.00 x 142.24 x 73.00 mm
(W x L x H Excluding Mating Connectors)

Protection Rating

 N/A IP65

Operating Temperature

 N/A -40 to 85 ºC-40 to 185 ºF

Reference Voltage

 N/A 2 +5V/+10V References

Applications

 N/A

Power Generation
Cogeneration
Stationary Power
Large Engines

Accessories

 N/A , Plug Kit: DT06-08A, W8S, sockets + DRC16-40S (no key), sockets