Request Information

Two universal signal inputs are configurable as: Voltage, Current, PWM, Digital or Resistive (for Input 1 only). The Thermocouple Module also monitors 1 channel of Type J, K, B, E, N, R, S or T thermocouples. The temperature information is provided to the engine control system over an isolated SAE J1939 CAN bus. Temperature information can include exhaust temperature, winding temperature, and fluid temperature monitoring. All channels are fully isolated. Temperature data is automatically sent over the CAN bus when power is applied. The input is isolated. Integral diagnostics can flag open wire fault detection. The product enclosure is rated as IP67 and has a 12 pin Deutsch style connector.

Order Code

 N/A P/N: AX189000 (Thermocouple Module, 1 TC, 2 Universal Signal, 2 SAE J1939, Auto-baud-rate Detect)

Operating Voltage

 N/A 12V, 24V or 48Vdc Nominal (9…60Vdc Power Supply Range)

Signal Inputs

 N/A 2 Universal Signal Inputs configurable as: Voltage, Current, PWM, Digital or Resistive (for Input 1 only)

Thermocouple Inputs

 N/A One (1) Type J, K, B, E, N, R, S or T

Communications

 N/A 2 Isolated CAN ports (SAE J1939)

Control Logic

 N/A Pre-programmed with standard logic. Refer to the user manual.

Enclosure

 N/A Molded Enclosure, Integral Connector
Nylon 6/6, 30% Glass, Ultrasonically Welded
3.54 x 2.75 x 1.31 inches
90.09 x 70.00 x 33.35 mm
L x W x H Including Integral Connectors

Connections

 N/A Integral TE Deutsch 12 pin Receptacle.

Protection Rating

 N/A IP67

Applications

 N/A Machine Engine Monitoring Systems Power Generator Sets

Accessories

 N/A , Electronic Assistant KIT (AX070501 USB-CAN, 2 Cables, Installation Instructions)