DC-DC Converters can provide stable DC supply when installed on battery-powered vehicles or generator sets. Battery taps can be avoided and sensitive equipment is protected. Isolation from battery power is often necessary for critical loads.Voltage can be stepped to a higher or The DC-DC Converter provides regulated 24Vdc power suitable for solenoids, relays and other electrical systems. For operation under the most harsh and demanding conditions, the IP67 rated unit protects against moisture, shock and vibration. Power from a battery or other source of 48 Vdc is converted to a 24Vdc output. The unit has a high current output capability of 30 Amps. The device manages heat dissipation and requires no forced cooling systems. Short-circuit and reverse polarity protections are provided. The compact unit is designed with extremely rugged surge and transient suppression in addition to sustained over/under voltage protection. With a nameplate rating of 720 Watts of output power, the DC-DC Converter provides proprietary multi-phase topology for a high efficiency of >96%
Order Code |
N/A P/N: AX081860K |
Protection |
N/A Inrush current limit Overtemperature protection Reverse polarity, input under/over voltage protections Short-circuit protection |
Inputs |
N/A 48 VDC Nominal (30...72 VDC) |
Outputs |
N/A
23.5-26.5 Vdc Maximum Factory set at 24 Vdc (nominal) ± 0.5% Regulation ± 3% |
Output Power |
N/A 720 W |
Output Current |
N/A 30 A Continuous |
Enclosure |
N/A
Cast Aluminum housing, integral gasket and connector 8.14 x 11.12 x 3.11 inches (206.00 x 282.00 x 79.00 mm) L x W x H including integral connectors |
Connections |
N/A 12 pin TE Deutsch connector P/N: DT13-12P |
Protection Rating |
N/A IP67 |
Applications |
N/A
Designed to interface between 48V batteries and 24V electrical systems found on mobile construction equipment, lift and access equipment, and buses. |
Datasheet |
N/A
TDAX081860 |
STEP Files (3D) |
N/A
AX081860 |
Compliance |
N/A
LVD - DoC - All RoHS - DoC - All |
