Request Information

This is a versatile and compact CAN SAE J1939 controller with 4 Universal Outputs. Its hardware design allows for a wide range of output types: Analog Current, Analog Voltage, Digital PWM, Digital Frequency and Digital ON/OFF.

All logical function blocks on the unit are inherently independent from one another but can be configured to interact with each other. The control algorithms / function blocks allow the user to configure the controller for a wide range of applications without the need for custom firmware using Axiomatic Electronic Assistant.

SAE J1939 CAN network can operate at standard 250 and 500 kbit/s and non-standard 667 kbit/s and 1 Mbit/s baud rates.

The controller accepts power supply voltages from 9 to 60 Vdc.

Unit of Measure

Order Code

 N/A P/N: AX030560

Operating Voltage

 N/A 12/24/24 VDC Nominal (9 to 60 VDC range)

Communications

 N/A 1 CAN SAE J1939-compliant port 250 kbit/s, 500 kbit/s, 667 kbit/s, 1 Mbit/s auto-baud-rate detection

Control Logic

 N/A (Application-specific control logic or factory programmed setpoints are available on request.) Standard embedded control logic is provided.

Enclosure

 N/A 3.55 in x 2.76 in x 1.31 in (90.1 mm x 70 mm x 33.4 mm) Molded Enclosure, integral connector Note: L x W x H excluding mating plugs Nylon 6/6, 30% glass, Ultrasonically welded

Protection Rating

 N/A IP67, PCB is conformal coated and protected by the housing.

Outputs

 N/A 4 signal outputs user selectable as analog current, analog voltage, digital PWM, digital frequency and digital ON/OFF

Applications

 N/A

Distributed controls for power generation, co-generation, stationary power
Distributed controls for commercial vehicles, off-highway equipment, industrial equipment, etc.

User Configurability

 N/A The controller setpoints can be viewed and programmed using the standard J1939 memory access protocol through the CAN port and the PC-based Axiomatic Electronic Assistant, AX070502 or AX070505K.

Datasheet

 N/A AX030560 Datasheey

User Manual

 N/A AX030560 User Manual

2D Drawing

 N/A AX030560-MD-R1

STEP Files (3D)

 N/A 12-Pin Laser Welded Assembly

Compliance

 N/A LVD - DoC - All
RoHS - DoC - All

Accessories

 N/A , Axiomatic Electronic Assistant KIT (USB-CAN Converter, USB-A to USB-B Cable, CAN Cable, Installation Instructions)