Request Information

The valve controller provides precise, repeatable control of 5 proportional or on/off solenoids over a SAE J1939 network. PWM signal inputs or analog voltage or current inputs are accepted for interface to a PLC, Engine Control Module or command potentiometers. Multiple switched inputs are provided to suit a range of applications. Each can be configured to measure the input value, and send the data to a SAE J1939 CAN network. In addition, any output on the controller could be configured to use any of the on board inputs as either a control signal or an enable signal, instead of taking the control information from the CAN bus. Diagnostics messages are provided over the CAN network for the status of inputs or outputs. Settings are user configurable via a Windows-based Electronic Assistant configuration tool interfacing to the controller via an USB-CAN device to suit a wide variety of applications.

Unit of Measure

Technical Specifications

 N/A 6 Input, 5 Output Valve Controller with SAE J1939

Order Code

 N/A P/N: AX020510

Operating Voltage

 N/A 12 or 24Vdc nominal (8…36 Vdc power supply range) NB. The maximum total current draw permitted on the power supply input pins is 7.5 Amps @ 24Vdc, at one time.

Control Logic

 N/A Standard embedded control logic is provided. User programmable functionality using Electronic Assistant

Enclosure

 N/A High Temperature Nylon Housing
TE Deutsch PCB Enclosure (EEC-325X4B)
4.62 x 5.24 x 1.43 inches
117.42 x 133.09 x 36.36 mm
(W x L x H Excluding Mating Plug)

Operating Temperature

 N/A -40 to 85 ºC-40 to 185 ºF

Outputs

 N/A 5 Independent outputs for hydraulic valves (0…2.5A) are user selectable from the following:
Proportional Current
Hotshot Digital
PWM Duty Cycle
Proportional Voltage
On/Off Digital

Inputs

 N/A Up to 6 inputs are selectable by the user from the following:
4 Analog/Digital/PWM Inputs
2 Frequency/Digital Inputs
All inputs, except for frequency and counter, are sampled every 10ms.

CAN

 N/A 1 CAN port (SAE J1939)

LED Outputs

 N/A None

Digital

 N/A Digital (2) Frequency (2) PWM (2)

CAN Baud Rate

 N/A 250 kbps

Fieldbus

 N/A SAE J1939

# Inputs

 N/A 2

# Outputs

 N/A 2

Analog (V or mA)

 N/A ± 5 V, ± 10 V (2) 0-5 V, 0-10 V (4) 4-20 mA, 0-20 mA (4)

Proportional and On/Off Solenoid

 N/A 1 (2.5A)

Enclosure (Filter)

 N/A Box

Datasheet

 N/A AX020510 Datasheet

User Manual

 N/A AX020510 User Manual

2D Drawing

 N/A AX020510-2D

STEP Files (3D)

 N/A AX020510

Compliance

 N/A EMC - DoC - AX02050X
LVD - DoC - All
RoHS - DoC - All

Accessories

 N/A , Electronic Assistant KIT (AX070501 USB-CAN, 2 Cables, Installation Instructions)
, Mating Plug KIT (DTM06-12SA, DTM06-12SB, 2 WM12S, 24 Contacts, Plugs)