The Speed Controller is a low-cost manual velocity controller designed to interface between 12 or 24V battery power and a remote grounded proportional solenoid valve. It is available in a direct panel mount for remote control of a proportional solenoid or packaged in a metal box for remote mounting. Reverse polarity protection and short circuit protection is provided.
Unit of Measure
Order Code |
N/A P/N: CC-SMB-01 (metal box version) |
Operating Voltage |
N/A 12 or 24 VDC nominal (9 to 32 VDC) |
Enclosure |
N/A Metal Box |
Operating Temperature |
N/A -40 to 85 ºC-40 to 185 ºF |
Applications |
N/A
Material handling equipment |
Reverse Polarity Protection |
N/A Inherent in Design |
Short Circuit Protection |
N/A Provided |
Regulated Current Output |
N/A 2 Amps (Adjustable) |
Minimum Current (Adjustable) |
N/A 0 to 500 mA (10 Turn Trim Pot) Increases as Trim Pot is Turned Clockwise |
Maximum Current (Adjustable) |
N/A 600 to 2000 mA (10 Turn Trim Pot) Increases as Trim Pot is Turned Clockwise |
Current Dither Frequency |
N/A 180 Hz (Fixed) |
Dither Amplitude |
N/A 10% (Fixed) |
Solenoid Selection (Nominal) |
N/A Solenoid selection should comply with: (Vpower supply – 1.5V)/I-max = R coil. |
Dimensions |
N/A
Powder Coated Metal Box (Grommet, Cabling Excluded) 4.87 x 5.75 x 1.75 Inches 123.82 x 146.05 x 44.45 mm (W x L x H) |
Connections |
N/A
INPUT: RED - Power + BLACK - Power GND OUTPUT: RED - Output + BLACK - Output GND |
Datasheet |
N/A
CC-X Datasheet |
Compliance |
N/A
LVD - DoC - All RoHS - DoC - All |
