The 40A DC Motor Controller features Unidirectional or bi-directional DC motor control (up to 40A), fully isolated output. Configurable and independent ramps smooth motor rotation, protecting the controller and the system. Additional 2 isolated current outputs (2A proportional, hotshot digital, PWM D.C., Proportional Voltage or On/Off Digital) drive accessories such as hydraulic valves or relays for machine control or safety interlock. Compact size for easy mounting on a vehicle.

Request Information
Unit of Measure
Items
AX102100

40A DC Motor Controller, SAE J1939
AX102101

40A DC Motor Controller, CANopen®
Description N/A

The 40A DC Motor Controller features Unidirectional or bi-directional DC motor control (up to 40A), fully isolated output. Configurable and independent ramps smooth motor rotation, protecting the controller and the system. Additional 2 isolated current outputs (2A proportional, hotshot digital, PWM D.C., Proportional Voltage or On/Off Digital) drive accessories such as hydraulic valves or relays for machine control or safety interlock. Electronic Assistant for setpoint configuration, compact size for easy mounting on a vehicle.

 		N/A

The 40A DC Motor Controller features Unidirectional or bi-directional DC motor control (up to 40A), fully isolated output. Configurable and independent ramps smooth motor rotation, protecting the controller and the system. Additional 2 isolated current outputs (2A proportional, hotshot digital, PWM D.C., Proportional Voltage or On/Off Digital) drive accessories such as hydraulic valves or relays for machine control or safety interlock. EDS file for setpoint configuration, compact size for easy mounting on a vehicle.
Order Code N/A P/N: AX102100 N/A P/N: AX102101
Operating Voltage N/A 12VDC, 24VDC or 48VDC Nominal (8…60 VDC)
Inputs N/A 2 isolated universal signal inputs are user configurable from the following: 0-5V; 0-10V; 0-20 mA; 4-20 mA; PWM or digital. 3 isolated digital inputs can act as STO (Safe Torque Off) or E-Brake safety interlock inputs.
Outputs N/A 2 isolated current outputs: (2.5A proportional, hotshot digital, PWM D.C., Proportional Voltage or On/Off Digital), drive accessories.
Signal Outputs N/A
Output Current N/A
Output Voltage N/A
Relay Output N/A
Output to Motor N/A
Communications N/A 1 SAE J1939 with Auto-Baud-Rate-Detect N/A 1 CANopen®
CAN Baud Rate N/A
Control Logic N/A Electronic Assistant AX070502 N/A EDS File
Enclosure N/A Encapsulated in an anodized cast aluminum enclosure with lid gasket
5.83 x 8.66 x 2.49 inches
148.00 x 220.00 x 63.25 mm
(W x L x H including connectors, excluding mating connectors)
Connections N/A Refer to Table 2.0. in pdf Datasheet Wires should be of the appropriate gauge to meet requirements of applicable electrical codes and suit the specifications of the connector(s).
Protection Rating N/A IP67
Operating Temperature N/A -40 to 85 ºC-40 to 185 ºF
Reference Voltage N/A 1 +5V Reference to power sensor inputs.
Applications N/A

Motor variable speed, position and/or flow control in Lift Equipment
Electric Vehicles for Material Handling
Cranes and Hoists
Hydraulic Tail Lifts and Winches
Golf Carts
Military Equipment
Mobile Pumps
Hydraulic Power Packs
EDS N/A N/A EDS-AX102101
Fieldbus N/A
+V Ref N/A
Mating Wire Harness or Plugs Included N/A
Bidirectional N/A
Motor Type N/A
H-bridge N/A
Configuration N/A
Digital N/A
Analog (V or mA) N/A
Accessories N/A , Wire Harness, 2m for AX102100 and AX102101
, Electronic Assistant KIT (AX070501 USB-CAN, 2 Cables, Installation Instructions)
 		N/A , Wire Harness, 2m for AX102100 and AX102101
, Mating Plug KIT (1-12 Socket)
Universal Signal Inputs N/A
Digital Input N/A