| Items |
 /Asset/IPWM-DR-200MA.gif PWMI-DR-200mA (PWM to 0-200mA) 8 Vdc, PWM Converter (Fully Isolated) |
 /Asset/PWMI-DR-20MA.gif PWMI-DR-20mA (PWM to 0-20mA) PWM Converter (Fully Isolated) |
/Asset/IPWM-DR-200MA.gif IPWM-DR-200mA IPWM-DR-200MA Current to PWM Converter |
 /Asset/PWMIWG8082x3.jpg PWMI-0000003 PWMI-WG8-08, PWM To 4-20mA Signal Converter, 100 mSec |
/Asset/PWMIWG8082x3.jpg PWMI-0000005 PWMI-WG8-06, PWM To 0-10V Signal Converter, 100 mSec. |
|||||
| Description |
PWM Converters provide a compact solution for converting digital pulse width modulated (PWM) signal into current or current into PWM. |
|||||||||
| Order Code | P/N: PWMI-DR-200mA (PWM to 0-200mA) | P/N: PWMI-DR-20mA (PWM to 0-20mA) | P/N: IPWM-DR-200mA (0-200mA to PWM) | P/N: PWMI-0000003 | P/N: PWMI-0000005 | |||||
| Operating Voltage | 24VDC Nominal (15-45VDC) | 24VDC Nominal (15-45VDC) | 24VDC Nominal (15...45VDC) | 24 VDC +/-10% | 24 VDC +/-10% | |||||
| Protection | Reverse Polarity Protection Provided. Transient Protection Provided. | Reverse Polarity Protection Provided. Transient Protection Provided. | Reverse Polarity Protection Provided. Transient Protection Provided. | Short circuit protection Transient Protection | Short circuit protection Transient Protection | |||||
| Voltage Input |
Low <1.5V High >3.5V (50V max.) TTL and CMOS Compatible |
Low <1.5V High >3.5V (50V max.) TTL and CMOS Compatible |
Low <1.5V High >3.5V (50V max.) TTL and CMOS Compatible |
Low <1.5V High >3.5V (50V max.) TTL and CMOS compatible |
Low <1.5V High >3.5V (50V max.) TTL and CMOS compatible |
|||||
| Current Input | Fully Isolated 0 - 200 mA | 4 to 20 mA | ||||||||
| Input Impedance | 200 kOhms | 200 kOhms | 5 Ohms | 200 kOhms | 200 kOhms | |||||
| PWM Input | Fully Isolated PWM Frequency 60 Hz to 2 kHz, PWM Range 0-99% | Fully Isolated PWM Frequency 60 Hz to 2 kHz, PWM Range 0-99% | ||||||||
| Voltage Output | 0.5 to 4.5 VDC | 0 to 10 VDC | ||||||||
| Output Voltage (Low) | 0.3 Vdc or Less at 1 mA 0.7 Vdc or Less at 10 mA | |||||||||
| Output Voltage (High) | 30 Vdc or Less at <10 mA | |||||||||
| PWM Output |
PWM 485 Hz +/- 10% 5-90% (Variable Active High) Open Collector Over-Current Protection |
|||||||||
| Output Current | 0-200 mA (PWMI-DR-200mA) Fully Isolated | 0-20 mA (PWMI-DR-20mA) Fully Isolated | 4-20 mA | |||||||
| Compliance Voltage Output | 8 VDC | 8 VDC | 10VDC | 6.5 VDC | ||||||
| Response Time Output | <40 mSec. | <40 mSec. | <10 mSec. | 100 mSec. | 100 mSec. | |||||
| Enclosure |
DR12, DIN Rail Mount, Polycarbonate 2.95 x 3.88 x 0.89 inches 75 x 98.5 x 22.5 mm (W x H x D) |
DR12, DIN Rail Mount, Polycarbonate 2.95 x 3.88 x 0.89 inches 75 x 98.5 x 22.5 mm (W x H x D) |
DR12, DIN Rail Mount, Polycarbonate 2.95 x 3.88 x 0.89 inches 75 x 98.5 x 22.5 mm (W x H x D) |
Housing (Wieland WEG8), Polyamide 6.6 plastic, UL94V-0, DIN rail mount 60.6 x 90.5 x 28.5 mm (W x H x D) 2.38 x 3.56 x 1.12 inches excluding DIN rail |
Housing (Wieland WEG8), Polyamide 6.6 plastic, UL94V-0, DIN rail mount 60.6 x 90.5 x 28.5 mm (W x H x D) 2.38 x 3.56 x 1.12 inches excluding DIN rail |
|||||
| Connections | #14-24 AWG Screw Terminals | #14-24 AWG Screw Terminals | #14-24 AWG Screw Terminals | #12 to #22 AWG screw terminals | #12 to #22 AWG screw terminals | |||||
| Protection Rating | IP20 Rated Terminals IP40 Rated Housing | IP20 Rated Terminals IP40 Rated Housing |
IP20 Rated Terminals IP40 Rated Housing |
IP20 | IP20 | |||||
| Operating Temperature | 0 to 95% Relative Humidity -40 to 85 ºC-40 to 185 ºF | 0 to 95% Relative Humidity -40 to 85 ºC-40 to 185 ºF | 0 to 95% Relative Humidity -40 to 85 ºC-40 to 185 ºF | -40 to 85 ºC-40 to 185 ºF | -40 to 85 ºC-40 to 185 ºF | |||||
| Adjustments |
Offset (Zero) and Span Trim Pots are 10 Turn CW = Increasing (Offset) CCW = Increasing (Span) Factory Settings: 0 mA (Offset) 200 mA or 20 mA (Span) |
Offset (Zero) and Span Trim Pots are 10 Turn CW = Increasing (Offset) CCW = Increasing (Span) Factory Settings: 0 mA (Offset) 200 mA or 20 mA (Span) |
Offset (Zero) and Span Trim Pots are 10 Turn CW = Increasing (Offset) CCW = Increasing (Span) Factory Settings: 0 mA (5% PWM) 200 mA (90% PWM) PWM Output can be Measured Using a Multi-meter (With a PWM Measurement Feature) |
Span and Offset (Zero) | Span and Offset (Zero) | |||||
| Applications | Industrial Controls Mobile Equipment | Industrial Controls Mobile Equipment | Industrial Controls Mobile Equipment |
Industrial and Machine Controls |
Industrial and Machine Controls |
|||||
|
|
||||||||||
