Print Back

As a highly flexible controller, it accepts one command signal input and drives a solenoid up to 3A. Many control profile parameters are user configurable. A PCB form factor is available. Operation is from -40 to 85 ºC. Designed to interface with 12V or 24V battery power, it is suitable for machine and industrial applications.  

Using Near Field Communication (NFC), the wireless valve controller is remotely configurable via a smartphone application. Bringing the two devices within 3 cm* (1 inch) of each other, the NFC technology uses magnetic induction between two loop antennas to communicate within the globally available radio frequency ISM band of 13.56 MHz.

There are 3 models available: PCB installed in a metal box with PG9 strain relief (AX020710-PG9), a PCB installed in a metal box with 1.5 m unterminated cable (AX020710-1.5M), or PCB Assembly (AX020710).

*The distance will vary with different phones.

Unit of Measure

Specifications

Technical Specifications

N/A Universal Input, Single Valve (3A) Controller, Metal Box, Strain Relief (1 PG9)
Configurable using E-WRITE NFC Application on Android and Apple iOS devices

Order Code

N/A P/N: AX020710-PG9

Operating Voltage

N/A 12Vdc or 24Vdc nominal (9…36 VDC power supply range)

Protection

N/A Reverse polarity protection is provided.
Overvoltage protection up to 45V is provided.
Over-voltage (under-voltage) shutdown of the output load is provided.

Inputs

N/A 1 universal input, user selectable as:
Voltage
Current
PWM
Frequency
Digital

Outputs

N/A Up to 3A
Half-bridge, High Side Sourcing, Current Sensing, Grounded Load High Frequency (25 kHz)
Users can select the following options for output using the E-Write NFC:
Proportional Output Current (with current sensing) (0-3A)
Proportional Output Voltage (up to Vps)
Output PWM Duty Cycle (0-100% D.C.)
Digital On/Off (Gnd-Vps)

Control Logic

N/A E-WRITE NFC Application for iOS devices E-WRITE NFC Application for Android devices

Enclosure

N/A Metal Box with gasket and PG9 strain relief
114.3 x 27.9 x 79.4 mm (4.50 x 1.01 x 3.13 inches)
(W x D x H excluding PG9 strain relief)

Connections

N/A 1 8-pin Screw Terminal Block (Wieland P/N: 25.197.0853.0)

Protection Rating

N/A IP67 for Metal Box once Cable is Properly Installed

Operating Temperature

N/A -40 to +85 ºC-40 to 185 ºF

Compliance

N/A CE / UKCA marking

Applications

N/A

Machine and Industrial Applications

+V Ref

N/A 5V, 50 mA

Product Documents

Datasheet

N/A AX020710-PG9 Datasheet

User Manual

N/A AX020710 User Manual

2D Drawing

N/A AX020720-PG9-MD-R1

Compliance

N/A LVD - DoC - All
RoHS - DoC - All