The Soft Shift Controller introduces a current ramp permitting the soft start of proportional solenoid valves used for pressure or flow control in hydraulic circuits. When the unit is powered on, it ramps to full current output over the ramp on time period that is adjustable within a factory set range. When the power is switched off, output of the unit falls immediately to zero. It is available in an IP65 rated DIN 43650 coil mount version.
Technical Specifications |
N/A 0-5 Sec, 2A, 225 Hz Soft Shift Controller, DIN 43650A |
Order Code |
N/A P/N: SSD-H-1-02-2M |
Operating Voltage |
N/A 9 to 32 VDC Nominal Power Supply Range |
Output Current Range (Adjustable) |
N/A 0.6 to 2.0 A |
Current Dither Frequency |
N/A 250 Hz (Fixed) +/- 10% |
Ramp on Time |
N/A Increasing - 0.01 to 5 seconds or customer specified range. |
Dither Amplitude |
N/A 10 % of Maximum Rated Current (Fixed) |
Solenoid Resistance |
N/A Rcoil<(V power supply - 1.5V)/I output |
Connections |
N/A
DIN 43650 plug connects to solenoid coil Unterminated jacketed cable connects to power supply Red (power +) and black (power -), 18 AWG conductors 2 meter cable length is standard (custom lengths available). Please contact the manufacturer for the connection details of the remote metal box version. |
Protection Rating |
N/A DIN 43650 coil mount version: IP65 when correctly installed with lid, compression washer, o-ring and base gasket. |
Operating Temperature |
N/A 0 to 85% Relative Humidity -40 to 85 ºC-40 to 185 ºF |
Applications |
N/A A Cost effective alternative for soft start of proportional hydraulic circuits |
