The CAN to Dual Output Valve Controller is a highly programmable controller, allowing the user to configure it for their application. It must be integrated into an SAE J1939 network of controllers. Its sophisticated control algorithms allow for open or closed loop drive of the proportional outputs. All logical function blocks on the unit are inherently independent but can be programmed to interact in a large number of ways.
Technical Specifications |
N/A CAN to 2 Outputs Valve Controller with LED, SAE J1939 |
Order Code |
N/A P/N: AX020200 (SAE J1939) |
Operating Voltage |
N/A 12Vdc or 24Vdc nominal (9...36 power supply range) The design is suited for engine cranking and load dump conditions. |
Outputs |
N/A Two independent software controlled outputs selectable as: Proportional Current (up to 2.5A); Hotshot Digital; PWM Duty Cycle; Proportional Voltage; or On/Off Digital types (3A) |
Communications |
N/A 1 SAE J1939 |
Control Logic |
N/A Standard embedded software with user programmable setpoints and control profiles (Refer to datasheet). |
Enclosure |
N/A
Molded Enclosure, Integral Connector Nylon 6/6, 30% Glass Ultrasonically Welded 88.2 x 70.0 x 33.3 mm 3.47 x 2.75 x 1.31 inches L x W x H Including Integral Connectors |
Connections |
N/A 8-pin connector. TE Deutsch P/N: DT04-08PA. |
Indicator |
N/A User configurable to react to different events or faults. |
Applications |
N/A
The controller is designed to meet the rugged demands of mobile equipment and heavy duty industrial machine control applications, such as PID closed loop valve control and hydraulic valve control. |
Datasheet |
N/A
AX020200 Datasheet |
User Manual |
N/A
AX020200 User Manual |
2D Drawing |
N/A
AX020200-2D |
STEP Files (3D) |
N/A
AX020200 |
Compliance |
N/A
EMC - DoC - AX020200 FCC- DoC - AX020200 LVD - DoC - All RoHS - DoC - All UKCA - DoC - AX020200 |
