The CAN to 2 Analog/Digital and 1 Relay Outputs Converter features 2 Analog/Digital signal outputs configurable as: 0-5V; 0-10V; 4-20 mA; Frequency or PWM Signal as well as 1 Relay output. Networking is via 1 isolated SAE J1939 port. It is Operational 9…36 Vdc (12 Vdc or 24 Vdc). The controller meets the surge requirements of SAE J1445, and is designed for EMC compliance for engine applications. Configuration is with the Axiomatic Electronic Assistant.
Order Code |
N/A P/N: AX130750 |
Operating Voltage |
N/A 12 or 24Vdc Nominal (9…36Vdc) The minimum allowable supply voltage for the power pin is 7 VDC. |
Communications |
N/A 1 CAN (SAE J1939, 250 kbps) |
CAN Baud Rate |
N/A 250 kbps |
Control Logic |
N/A Electronic Assistant AX070502 Pre-programmed with standard logic. |
Enclosure |
N/A
Molded Enclosure, integral connector Nylon 6/6, 30% Glass Ultrasonically Welded 3.54 x 2.75 x 1.31 inches (90.09 x 70.00 x 33.35 mm) L x W x H including integral connector |
Protection Rating |
N/A IP67 |
Applications |
N/A
Throttle controls for marine engine applications |
Datasheet |
N/A
AX130750 Datasheet |
User Manual |
N/A
AX1307x0 User Manual |
2D Drawing |
N/A
AX130750-2d-3 |
STEP Files (3D) |
N/A
12-Pin Laser Welded Assembly |
Compliance |
N/A
EMC - DoC - AX1307XX LVD - DoC - All RoHS - DoC - All |
Accessories |
N/A
AX070502, Axiomatic Electronic Assistant KIT (USB-CAN Converter, USB-A to USB-B Cable, CAN Cable, Installation Instructions) PL-DTM06-12SA, Mating Plug KIT (1-12 Socket) |
