As a highly flexible controller, it accepts one command signal input and drives a solenoid up to 3A. Many control profile parameters are user configurable. A PCB form factor is available. Operation is from -40 to 85 °C. Designed to interface with 12V or 24V battery power, it is suitable for machine and industrial applications.
Using Near Field Communication (NFC), the wireless valve controller is remotely configurable via a smartphone application. Bringing the two devices within 3 cm* (1 inch) of each other, the NFC technology uses magnetic induction between two loop antennas to communicate within the globally available radio frequency ISM band of 13.56 MHz.
There are 3 models available: PCB installed in a metal box with PG9 strain relief (AX020710-PG9), a PCB installed in a metal box with 1.5 m unterminated cable (AX020710-1.5M), or PCB Assembly (AX020710).
*The distance will vary with different phones.
Technical Specifications |
N/A
Universal Input, Single Valve (3A) Controller, Metal Box, 1.5 M Cable With Near Field Communication (NFC) Configurable using E-WRITE NFC Application on Android and Apple iOS devices |
Order Code |
N/A P/N: AX020710-1.5M |
Operating Voltage |
N/A 12Vdc or 24Vdc nominal (9…36 VDC power supply range) |
Protection |
N/A
Reverse polarity protection is provided. Overvoltage protection up to 45V is provided. Over-voltage (under-voltage) shutdown of the output load is provided. |
Inputs |
N/A
1 universal input, user selectable as: Voltage Current PWM Frequency Digital |
Outputs |
N/A
Up to 3A Half-bridge, High Side Sourcing, Current Sensing, Grounded Load High Frequency (25 kHz) Users can select the following options for output using the E-Write NFC: Proportional Output Current (with current sensing) (0-3A) Proportional Output Voltage (up to Vps) Output PWM Duty Cycle (0-100% D.C.) Digital On/Off (Gnd-Vps) |
Control Logic |
N/A E-WRITE NFC Application for iOS devices E-WRITE NFC Application for Android devices |
Enclosure |
N/A
Metal Box with gasket and PG9 strain relief 114.3 x 27.9 x 79.4 mm (4.50 x 1.01 x 3.13 inches) (W x D x H excluding PG9 strain relief) The cable is 1.5M in length and is unterminated. |
Connections |
N/A 1 8-pin Screw Terminal Block (Wieland P/N: 25.197.0853.0) |
Protection Rating |
N/A IP67 for Metal Box once Cable is Properly Installed |
Operating Temperature |
N/A -40 to +85 ºC-40 to 185 ºF |
Compliance |
N/A CE / UKCA marking |
Applications |
N/A
Machine and Industrial Applications |
+V Ref |
N/A 5V, 50 mA |
Datasheet |
N/A
AX020710-1.5M Datasheet |
User Manual |
N/A
AX020710 User Manual |
STEP Files (3D) |
N/A
AX020710 |
Compliance |
N/A
LVD - DoC - All RoHS - DoC - All |
