The Remote Mount Solenoid Driver simplifies control of proportional solenoids by supplying a current proportional to a 0-10V input signal. It utilizes high frequency switching output (PWM) to provide a DC current output. Current outputs vary by model number. The user can adjust maximum and minimum current, ramp time, dither frequency and amplitude.
Operating Voltage |
N/A 9...28 VDC Accepts up to a maximum of 32 VDC |
Inputs |
N/A
0-10 VDC voltage signal, or 0-20 mA current signal |
Input Resistance |
N/A Current mode: 33 Ohms Voltage mode: 250K Ohms |
Quiescent Current |
N/A
13.7 mA @ 12VDC 10 mA @ 24VDC |
Range of Maximum Output Current |
N/A 2A |
Enclosure |
N/A
DIN Rail Mount 90.0 x 68.0 x 70.0 mm 3.54 x 2.67 x 2.75 inches (W x L x H excluding foot) |
Connections |
N/A 10 screw terminals accept 16-20 AWG wire for the power conductors and 18-24 AWG wire for the signal conductors |
Protection Rating |
N/A
IP00 Circuit board is conformally coated. |
Operating Temperature |
N/A -40 to 85 ºC-40 to 185 ºF |
Compliance |
N/A
CE Emission EN 50081-2 Immunity EN 50082-2 |
Applications |
N/A
Accurate control of hydraulic and pneumatic proportional solenoid valves used in mobile equipment and industrial processes. |
Datasheet |
N/A
TD1501AX |
Compliance |
N/A
LVD - DoC - All RoHS - DoC - All |
STEP Files (3D) |
N/A
RSDDR10V-0000001 |
