The wake-on-charge module manages the vehicle controller power mode for wake and sleep. It has a charger status indication when the vehicle is plugged in (on charge).
Order Code |
N/A P/N: AX130600 |
Operating Voltage |
N/A 12Vdc nominal (6...16Vdc power supply range) |
Inputs |
N/A
Accepts 1 Control Pilot Input Signal Detects when a Control Pilot signal is present and triggers the module to wake up within 100 ms. Reads the PWM duty cycle of the Control Pilot Signal input (3-95% D.C.) from an EVSE With a resolution of 0.5% and accuracy of 1% Impedance compatible with SAE J1772 Vehicle State B and C |
Outputs |
N/A
200 mA @12VDC (with a drop of 1VDC permitted) High side driver |
LED Outputs |
N/A 2 LED Outputs |
Control Logic |
N/A
Module Wake/Sleep VCU Wake/Sleep Delayed Module Sleep/VCU Re-wake Control of power mode LED Control (separately) Status Feedback over CAN of all inputs and outputs |
CAN |
N/A 1 CAN 2.0 B port; 500 kbps baud rate; 11-bit ID |
Enclosure |
N/A
Cast Aluminum housing with mounting holes 4.62 x 1.91 x 1.76 inches (117.30 x 48.56 x 44.73 mm) L x W x H including integral connector |
Protection Rating |
N/A IP67 |
Operating Temperature |
N/A -40 to 50 ºC-40 to 122 ºF |
Applications |
N/A
Electric Vehicles |
Datasheet |
N/A
TDAX130600 |
STEP Files (3D) |
N/A
DT15-08PA Generic Enclosure |
Compliance |
N/A
LVD - DoC - All RoHS - DoC - All |
