Axiomatic Technologies Corporation
Axiomatic Technologies Corporation
1445 Courtneypark Drive E.
Mississauga, ON L5T 2E3, Canada
Phone: +1 905 602 9270
Fax: +1 905 602 9279
Email: sales@axiomatic.com
Website: www.axiomatic.com
Print Back
The LVDT Simulator is used to test LVDT or RVDT sensors. Using a 0- 10VDC command signal input and an excitation (drive input), the unit provides two simulation outputs of 1-5VAC. An internal 3kHz oscillator can be utilized as an alternative excitation source. Both outputs are fully isolated. The unit accepts power supply input from 4 to 32VDC. When the input voltage increases from 0-10VDC, the output voltage A increases from 1 to 5VAC and the output voltage B decreases from 5 to 1VAC. Factory settings for the offset (minimum) and span (maximum) are user adjustable. A LED indicates power is OK. The unit is conformal coated and available in a DIN rail mount housing.
LVDTS-DR-02 LVDT/RVDT Simulator
Unit of Measure
Items LVDTS-DR-02 LVDT/RVDT Simulator
LVDTS-DR-02
LVDTS-DR-02 LVDT/RVDT Simulator 		LVDTS-DR-03
LVDTS-DR-03
LVDTS-DR-03 LVDT/RVDT Simulator 		LVDTS-DR-04
LVDTS-DR-04
LVDTS-DR-04 LVDT/RVDT Simulator
Description N/A

The LVDT Simulator is used to test LVDT or RVDT sensors. Using a 0-10VDC command signal input and an excitation (drive input), the unit provides two simulation outputs of 1-5VAC. An internal 3kHz oscillator can be utilized as an alternative excitation source. Both outputs are fully isolated. The unit accepts power supply input from 4 to 32VDC. When the input voltage increases from 0-10VDC, the output voltage A increases from 1 to 5VAC and the output voltage B decreases from 5 to 1VAC. Factory settings for the offset (minimum) and span (maximum) are user adjustable. A LED indicates power is OK. The unit is conformal coated and available in a DIN rail mount housing.

 		N/A

The LVDT Simulator is used to test LVDT or RVDT sensors. Using a 0- 10VDC command signal input and an excitation (drive input), the unit provides two simulation outputs of 1-5VAC. An internal 3kHz oscillator can be utilized as an alternative excitation source. Both outputs are fully isolated. The unit accepts power supply input from 4 to 32VDC. When the input voltage increases from 0-10VDC, the output voltage A increases from 1 to 5VAC and the output voltage B decreases from 5 to 1VAC. Factory settings for the offset (minimum) and span (maximum) are user adjustable. A LED indicates power is OK. The unit is conformal coated and available in a DIN rail mount housing.

 		N/A

The LVDT Simulator is used to test LVDT or RVDT sensors. Using a 0- 10VDC command signal input and an excitation (drive input), the unit provides two simulation outputs of 1-5VAC. An internal 3kHz oscillator can be utilized as an alternative excitation source. Both outputs are fully isolated. The unit accepts power supply input from 4 to 32VDC. When the input voltage increases from 0-10VDC, the output voltage A increases from 1 to 5VAC and the output voltage B decreases from 5 to1VAC. Factory settings for the offset (minimum) and span (maximum) are user adjustable. A LED indicates power is OK. The unit is conformal coated and available in a DIN rail mount housing.
Order Code N/A P/N: LVDTS-DR-02 N/A P/N: LVDTS-DR-03 N/A P/N: LVDTS-DR-04
Operating Voltage N/A 4-32 VDC
Protection N/A Reverse Polarity Protection Provided.
Inputs N/A 0-10VDC Command Signal Input
2-10 VAC Drive Input (5VAC Nominal)
Outputs N/A 1 Oscillator Output
Frequency: 3kHz +/- 5%
Voltage: 3VAC +/- 5%
Enclosure N/A DR12, DIN Rail Mount (35 mm)
16 Amp max. Current Rating
Polycarbonate
75 x 98.5 x 22.5 mm (W x H x D)
2.95 x 3.87 x 0.88 Inches
Connections N/A Screw Terminals Accept 14-24 AWG Wire
Protection Rating N/A IP40 Rated Housing, Terminals Rated at IP20
Circuit boards are conformal coated. 		N/A IP40 Rated Housing, Terminals Rated at IP20
Circuit boards are conformal coated. 		N/A IP40 Rated Housing, Terminals Rated at IP20
Circuit boards are conformal coated.
Operating Temperature N/A -40 to 85 ºC-40 to 185 ºF
Minimum Offset Adjustments N/A Remove plastic cover to access single turn trim pots.
With 0VDC command input, confirm B-Maximum is set to 5VAC and A-Minimum to 1VAC.
Maximum Span Adjustments N/A Remove plastic cover to access single turn trim pots.
With 10VDC command input, confirm B-Minimum is set to 1VAC and A-Maximum to 5VAC.
Indicator N/A Power OK – LED ON
Weight N/A 0.25 lb0.11 kg
Settling Time N/A 30 mSec (with 60 degree Phase relationship between input and output signals) N/A 5 mSec (with <1 degree Phase relationship between input and output signals) N/A 30 mSec (with 10 degree Phase relationship between input and output signals)