Axiomatic Technologies Corporation
Axiomatic Technologies Corporation
1445 Courtneypark Drive E.
Mississauga, ON L5T 2E3, Canada
Phone: +1 905 602 9270
Fax: +1 905 602 9279
Email: sales@axiomatic.com
Website: www.axiomatic.com
Print Back
The CAN-PWM Signal Converter features PWM Signal output to communicate with an engine ECM; output is user configurable as Frequency or digital. This product meets the surge requirements of SAE J1445, and is designed for EMC compliance, and is configurable with Axiomatic Electronic Assistant.
AX130700 CAN-PWM Signal Converter, SAE J1939
Unit of Measure
Items AX130700 CAN-PWM Signal Converter, SAE J1939
AX130700AB
SAE J1939 CAN to PWM Signal Converter 		AX130701 CAN-PWM Signal Converter, CANopen
AX130701
CANopen to PWM Signal Converter
Description N/A

The CAN-PWM Signal Converter features PWM Signal output to communicate with an engine ECM; output is user configurable as Frequency or digital. This product meets the surge requirements of SAE J1445, and is designed for EMC compliance, and is configurable with Axiomatic Electronic Assistant.

 		N/A

The CAN-PWM Signal Converter features PWM Signal output to communicate with a control. Output is user configurable as Frequency or digital. It has 1 isolated CAN port (CANopen®) to read engine speed messages or other engine information. The Signal Converter meets the surge requirements of SAE J1445 and is designed for EMC compliance. It is IP67 rated.
Technical Specifications N/A CAN to PWM Signal Controller, SAE J1939 N/A CAN-PWM Signal Converter
CANopen®
Order Code N/A P/N: AX130700AB N/A P/N: AX130701
Operating Voltage N/A 12 Vdc or 24 Vdc Nominal N/A 12 V or 24 Vdc Nominal
Outputs N/A Digital Level
Digital On/Off
5V or 12V amplitude
Maximum load is 50mA (at 5V) or 30mA (at 12V)

PWM Signal, Frequency Signal or Mixed Output:
1 Hz to 20 kHz
0 to 100% DC (user configurable)
5V or 12V amplitude
Push pull output
Maximum load is 50 mA (at 5V) or 30 mA (at 12 V)
Overcurrent protection 		N/A Digital Level:
Digital On/Off
5V or 12V amplitude
Maximum load is 50mA (at 5V) or 30mA (at 12V)

PWM Signal, Frequency Signal or Mixed Output:
1 Hz to 20 kHz
0 to 100% DC (user configurable)
5V or 12V amplitude
Push pull output
Maximum load is 50 mA (at 5V) or 30 mA (at 12 V)
Overcurrent protection
Communications N/A 1 CAN (SAE J1939 with Auto-Baud-Rate-Detection) N/A 1 CAN (CANopen®)
Control Logic N/A The CAN-PWM Signal Converter comes pre-programmed with standard logic. User configurable functionality using Electronic Assistant (P/N: AX070502). N/A EDS File User programmable functionality using SDO object access, per CiA DS-301.
Enclosure N/A Plastic Enclosure, Nylon 6-6 with 30% glass fill.
Integral TE Deutsch Connector
3.030 x 2.413 x 1.314 Inches
77.0 x 61.3 x 33.4 mm (L X W X H) 		N/A Plastic Enclosure, Nylon 6-6 with 30% glass fill
Integral TE Deutsch Connector
3.030 x 2.413 x 1.314 Inches
77.0 x 61.3 x 33.4 mm (L X W X H)
Connections N/A 6 pin TE Deutsch connector P/N: DT04-6P.
Protection Rating N/A IP67
Operating Temperature N/A -40 to 85 ºC-40 to 185 ºF
Applications N/A

Off-Highway Equipment Controls
Power Generator Set Control Systems
Engine Controls
Accessories N/A AX070119, Mating Plug Kit (1 DT06-6S, 1 W6S, 6 0462-201-16141)
AX070502, Electronic Assistant KIT (AX070501 USB-CAN, 2 Cables, Installation Instructions)
 		N/A AX070119, Mating Plug Kit (1 DT06-6S, 1 W6S, 6 0462-201-16141)
EDS N/A N/A EDS-AX130701