The RS-232 to CAN Converter with Two Digital Inputs is a compact device for interfacing RS-232 satellite phones or GPS systems with CAN bus in on-road commercial vehicles.
The RS-232 serial port interface is provided with user-configurable frame forwarding system to convert serial port messages into CAN frames. Likewise, the two fully isolated CAN interfaces have user-configurable CAN ID filtering and frame forward system, to convert CAN frames into serial port messages. By default, the primary CAN port (CAN1) supports J1939 messaging and uses passive baud rate discovery to detect CAN network baud rate.
In addition, two digital signal inputs are provided. The inputs can be configured to measure frequency, PWM and digital signals. Measured input data can be sent to a SAE J1939 CAN Network or used to enable/disable frame forwarding.
A Windows-based Axiomatic Electronic Assistant (EA) is used to configure the controller via a USB-CAN (AX070501) device. Setpoint configuration can be saved in a file which can be used to easily program the same configuration into another device of the same P/N.
Order Code |
N/A P/N: AX030350 |
Operating Voltage |
N/A 12 Vdc or 24 Vdc Nominal (9 to 60 Vdc) |
Communications |
N/A 1 RS-232 port 2 Isolated CAN ports (SAE J1939) (CANopen® on request) |
Control Logic |
N/A Standard embedded software is provided. (Application-specific control logic or a set point file is available on request.) |
Enclosure |
N/A (90.1 mm x 70 mm x 33.4 mm) 3.55 in x 2.76 in x 1.31 in L x W x H including integral connector |
Connections |
N/A Integral 12-pin receptacle (equivalent to TE Deutsch P/N: DTM04-12PA) |
Protection Rating |
N/A IP67 |
Operating Temperature |
N/A -40 to 85 ºC-40 to 185 ºF |
Protection |
N/A Overvoltage Protection (Protection up to 38 V) Reverse Polarity Protection (-50 V) Undervoltage Protection (Shutdown at 6 Vdc) |
Applications |
N/A Interfaces RS-232 satellite phones or GPS systems with CAN bus in on-road commercial vehicles |
User Configurability |
N/A Axiomatic Electronic Assistant, P/N: AX070502 or AX070505K |
Inputs |
N/A 2 digital inputs user-programmable as frequency, RPM, PWM or digital signal inputs types |
CAN Baud Rate |
N/A 250 kbit/s, 500 kbit/s, 667 kbit/s, 1 Mbit/s auto-baud-rate detection |
Datasheet |
N/A
TDAX030350 |
User Manual |
N/A
UMAX030350 |
STEP Files (3D) |
N/A
12-Pin Laser Welded Assembly |
Compliance |
N/A
LVD - DoC - All RoHS - DoC - All |
Accessories |
N/A
AX070502, Electronic Assistant KIT (AX070501 USB-CAN, 2 Cables, Installation Instructions) |
