The Speed Controller is a low-cost manual velocity controller designed to interface between 12 or 24V battery power and a remote grounded proportional solenoid valve. It is available in a direct panel mount for remote control of a proportional solenoid or packaged in a metal box for remote mounting. Reverse polarity protection and short circuit protection is provided.
Order Code |
N/A P/N: CC-01 (panel mount version) |
Operating Voltage |
N/A 12 or 24 VDC nominal (9 to 32 VDC) |
Enclosure |
N/A PCB |
Operating Temperature |
N/A -40 to 85 ºC-40 to 185 ºF |
Applications |
N/A
Material handling equipment |
Reverse Polarity Protection |
N/A Inherent in Design |
Short Circuit Protection |
N/A Provided |
Regulated Current Output |
N/A 2 Amps (Adjustable) |
LED Outputs |
N/A None |
Minimum Current (Adjustable) |
N/A 0 to 500 mA (10 Turn Trim Pot) Increases as Trim Pot is Turned Clockwise |
Maximum Current (Adjustable) |
N/A 600 to 2000 mA (10 Turn Trim Pot) Increases as Trim Pot is Turned Clockwise |
Current Dither Frequency |
N/A 180 Hz (Fixed) |
Dither Amplitude |
N/A 10% (Fixed) |
Solenoid Selection (Nominal) |
N/A Solenoid selection should comply with: (Vpower supply – 1.5V)/I-max = R coil. |
Dimensions |
N/A
63.7 x 63.7 x 48.2 mm 2.50 x 2.50 x 1.89 Inches (W x L x H) |
Analog (V or mA) |
N/A Potentiometer |
Fieldbus |
N/A No |
Proportional and On/Off Solenoid |
N/A 1 (2A) |
# of Connections |
N/A 3 |
# Inputs |
N/A 1 |
# Outputs |
N/A 1 |
Connections |
N/A BLACK - Output + 24 in. of 18 AWG lead wires GREEN - Power GND and Output GND RED - Power + |
