Axiomatic Technologies Corporation
Axiomatic Technologies Corporation
1445 Courtneypark Drive E.
Mississauga, ON L5T 2E3, Canada
Phone: +1 905 602 9270
Fax: +1 905 602 9279
Email: sales@axiomatic.com
Website: www.axiomatic.com
Print Back
The 1 Universal Input CAN Controller belongs to a family of Axiomatic smart controllers with programmable internal architecture. This provides users with flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using the PC-based Axiomatic Electronic Assistant® software tool. Application programming is performed through the CAN interface, without disconnecting the controller from the user’s system.
AX030530 1 Analog Signal Input CAN Controller SAE J1939
Unit of Measure
Items AX030530 1 Analog Signal Input CAN Controller SAE J1939
AX030530
1 Universal Signal Input Controller, SAEJ1939 		AX030550 CAN to SINE/Square Wave Output and PWM Output Controller 2 SAE J1939
AX030550
CAN to SINE/Square Wave Output and PWM Output Controller, 2 SAE J1939
Description N/A
The 1 Universal Input CAN Controller belongs to a family of Axiomatic smart controllers with programmable internal architecture. This provides users with flexibility, allowing them to build their own custom controller with a required functionality from a set of predefined internal functional blocks using the PC-based Axiomatic Electronic Assistant® software tool. Application programming is performed through the CAN interface, without disconnecting the controller from the user’s system.
 		N/A

This controller has 2 isolated CAN (SAE J1939) ports. The signal output is configurable as SINE or Square wave (0-5V). It also provides a PWM output signal. The control has a rugged IP67 enclosure and connector. To configure the device, use the Electronic Assistant.
Order Code N/A P/N: AX030530 N/A P/N: AX030550 (SAE J1939 250 Kbps)
Operating Voltage N/A 12VDC or 24VDC or 48VDC Nominal (9…60 Vdc Power Supply Range) N/A 12Vdc or 24Vdc nominal
Inputs N/A 1 Universal Signal Input (Voltage, Current, Resistive, Digital, Frequency or PWM)
User selectable input range from: 0-1V; 0-2.5V; 0-5V; 0-10V; 0- 20mA; 4-20 mA; 20 Ohm to 250 kOhm (Auto Range or User Selectable Ranges); 10Hz – 1 kHz; or 100 Hz – 10 kHz
SINE or Square Wave Output N/A N/A 1 Signal output configurable as:
SINE wave
Square wave
Frequency is user selectable from 10 Hz to 20 kHz
Minimum load 10 kΩ
Amplitude: 5V peak-to-peak
PWM Output N/A N/A 1 PWM Output from 0 to 36Vps
1 Hz to 1 kHz Frequency
Current limited to 200 mA
Communications N/A 1 CAN port (SAE J1939) N/A SAE J1939
Control Logic N/A Standard embedded software is provided.
(Application-specific control logic or factory programmed setpoints are available on request.)
User programmable functionality using Electronic Assistant
Enclosure N/A Encapsulated
Cast Aluminum housing with mounting holes.
4.62 x 1.91 x 1.76 inches
117.30 x 48.56 x 44.73 mm
L x W x H Including Integral Connector 		N/A Aluminum Enclosure, Integral TE Deutsch Connector, Encapsulation
4.750 x 2.150 x 1.802 inches
120.66 x 54.61 x 45.77 mm (L X W X H)
Connections N/A N/A 12 pin TE IPD connector P/N: DT15-12PA
Protection Rating N/A IP67 PCB is Conformal Coated and Protected by the Housing N/A IP67
Operating Temperature N/A -40 to 85 ºC-40 to 185 ºF
Reference Voltage N/A N/A 1 +5V +/- 0.5%, 100 mA Maximum
Applications N/A

Distributed controls for commercial vehicles, off-highway equipment, industrial equipment, etc.

Distributed controls for power generation, co-generation, stationary power.

 		N/A Construction equipment trucks, interface between ECM and turbocharger.
Accessories N/A AX070112, Plug Kit: DT06-08SA, W8S, 0462-201-16141, 114017
AX070502, Electronic Assistant KIT (AX070501 USB-CAN, 2 Cables, Installation Instructions)
 		N/A AX070105, Plug Kit (DT06-12SA, W12S, 0462-201-16141, 114017)
AX070502, Electronic Assistant KIT (AX070501 USB-CAN, 2 Cables, Installation Instructions)